You will need to go to our new forum to post new topics

Green Building Press
Capturing wasted heat with a heat recovery unit
   Back To Forum Index
   
    You Are On Page: 1 of 3   >  
 

Capturing wasted heat with a heat recovery unit

Philposted on 07-01-07
Hi

I'm trying to build a well-insulated and airtight bungalow. I will be putting a large wood-burning stove in, it will have a free standing flue going up through the ceiling and continuing ten foot until going outside. I was wondering if I coiled the intake pipe from the HRV round the flue would it heat the incoming air up?

I'm also incorporating four velux sun tunnels which use a small velux window 355mm diameter reflective tunnel to channel day light from the roof to the ceiling. I was wondering if I could capture any heat stored in these tunnels to be used in the HRV?

Any thoughts on this would be appreciated.

Thanks
Phil

Tonnotposted on 07-01-07
have you considered a rocket stove?
these things are meant to be extra efficant.
Philposted on 07-01-07
Thanks Tonnot

Sorry new to all this. Is there a web site on this or could you tell me a bit more so i can search for it.

Phil
Tonyposted on 07-01-07
Yes you can recover heat from the flue pipe. There are down sides as this will cause the flue to both condense tar and water.

The light tubes you have in mind are a real waste of time except in very hot climates where you want light but not heat. Have a think about proper roof windows and light wells. It would not be practical to try to recover heat from either the tubes or the wells.
Bernardposted on 07-01-07
Quote "" I was wondering if I coiled the intake pipe from the HRV round the flue would it heat the incoming air up? ""

If you heat the incoming air by cooling the flue you may reduce the thermal induced air flow below the minimum required for efficient combustion.



fostertomposted on 07-01-07
Yes, best to seek a stove that's designed to do its extracting within the stove, taking max practicable heat out of the combustion gasses leaving just enough for reliable adequate flue 'draw'. Extract any more heat e.g. from the flue and there won't be enough gas buoyancy to create adequate draw. Some stoves are built into a brick core of the house which has airways that extract much of the heat effectively from the flue, but it's all carefully designed.
Another thing to seek is a closed stove that draws its combustion air from outside, not from the house's air space. The latter plays havoc with any attempt at a sealed/balanced heat recovery ventilation system.


    You Are On Page: 1 of 3   >        1 2 3   >    
 
Go Back To Forum Index

 

 

This month's favourite choices

    Green Building Bible ((both volumes) fourth edition)
    Green Building Bible ((both volumes) fourth edition)  
    These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

    1 year Green Building magazine subscription
    1 year Green Building magazine subscription  
    Green Building magazine is the UK's only eco-building magazine. It always features a wide range of eco-building projects from all around the UK.

    Ecohouse 3
    Ecohouse 3  
    Sue Roaf never fails to impress with her inexaustible energy, forthright opinion and attention to detail. Ecohouse has become a classic in the green building genre.

    Green Building magazine - Winter 2008 - Radical renovation
    GBmag Winter 2008  
    This issue focuses on renovation and the AECB carbonlite/passivhaus standards, thermal upgrade options, energy calculation dynamic software and lots more.



GreenPro
GreenPro

Do you want to find products that make your buildings greener? Look no further than Greenpro!
Already registered?
Then go to the Login page

Not registered yet?

 

 
 
 
   
|   Site Map   |   Home    |   View Cart    |   Links   |   Pressroom   |   Business
Contact us
Logout  

© Green Building Press