Vanilla 1.1.4 is a product of Lussumo. More Information: Documentation, Community Support.
1 to 20 of 20
Posted By: Sprocket1) The outer layer of newlath DPC on the walls. Tricky stuff to seal at edges but we did our best to seal overlapped sheets with Orcon-F and then tape.2) We did not think that was enough so on top of this we added a layer of heavy duty breathable VCL. Taped at edges.
Posted By: angliaIf you're not installing an MVHR system, you should aim for a result between 3 and 5M3/hr/M2@50pa
Posted By: wookeyDavid - I think the battens are on top of both membranes so they are not trapped between. The two membranes are right next to each other.
Posted By: SprocketThe battens are fortunately not in contact with the membranes. The rubble walls are so crooked that it was simpler to fix at top and bottom to rafters and floor so there is a 20~80mm air gap. They rest on Perinsul block (sintered glass to insulate the edges of the heated floor).
© Green Building Press