Not signed in (Sign In to the Green Building Forum)
Categories
- General
- Essential for Newbies
- Building Regulations and Standards
- Commercial build
- Data and monitoring
- Downshifting
- Energy Assessment
- Events and Courses
- Fundamentals
- Green Building Bible
- Green Building magazine
- Green Living
- Heating and cooling
- Housing - New Build
- Housing - Renovation
- Offers and wants
- Politics
- Products
- Renewable Energy
Vanilla 1.1.4 is a product of Lussumo. More Information: Documentation, Community Support.
Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications:: Apply now.
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications:: Apply now.
-
- CommentAuthorowlman
- CommentTimeNov 23rd 2011
Sometime over the next few weeks I'll be removing my twin coil copper cylinder Its about 160-180l, it's pre- foamed although not thick enough, and also has an immersion fitted. Before I take it to the scrap metal guys any offers? I'm in N'Yorkshire. -
- CommentAuthorMegacycles
- CommentTimeNov 24th 2011
Is it a solar cylinder, ie large surface area coil at the bottom? -
- CommentAuthorowlman
- CommentTimeNov 25th 2011
Posted By: Megacycles............Is it a solar cylinder, ie large surface area coil at the bottom?
Not specifically, I assume it's just two intertwined copper coils. Previously it ws used with one coil on the oil boiler and the other on a back boiler.
1 to 3 of 3
