<?xml version="1.0" encoding="utf-8"?>
	<rss version="2.0">
		<channel>
			<title>Green Building Forum - All Discussions</title>
			<lastBuildDate>Thu, 19 Nov 2026 05:04:06 +0000</lastBuildDate>
			<link>https://www.greenbuildingforum.co.uk/newforum/</link>
			<description></description>
			<generator>Lussumo Vanilla 1.0.3</generator>
			<item>
		<title>Broadband and VoIP</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18453</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18453</guid>
		<pubDate>Sat, 04 Jul 2026 14:48:15 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br /><br />Frequently happening as I get older, I am getting my knickers in a twist as technology leaves me behind.  <br />At the moment, broadband and landline is with PlusNet via fibre to the pole.  We are not paying for the landline, but it does receive incoming and we would pay per minute for outgoing calls.<br /><br />My contract is ending but PlusNet are no longer offer a landline, just Full Fibre b/b.  However, their associate company EE, will offer full  fibre to the house and I assume, VoIP to keep the phone and phone number.<br /><br />I am told that an engineer will have to assess how to get the fibre to, and then, into the house.  At the moment, it is overhead to the front roof apex, then  phone cable to the various RJ45 sockets which was part of the building process.  The ''customer help' was not exactly helpful with my questions, but ......<br /><br />Fibre has to come to the router which if it was in the loft, can I then use the existing wiring to the computers on the g/f?<br /><br />The 'unhelpful' assistant was suggesting the fibre will have to be routed down the wall then drilled through the wall to where the office is located.   The house is timber frame with Warmcel insulation.  There is the breather paper on the frame (but that is inside the cavity) and internally, there is scrim under the Fermacel.  Drilling through either of these materials is like drilling into a ball of wool; it just rips everything to shreds.<br /><br />How does a fibre cable come into a very well sealed house if it has to be drilled through the frame and insulation?  Once inside the house, can I use the existing wiring to use additional computers in different rooms?  <br /><br />Thanks and toodle pip]]>
		</description>
	</item>
	<item>
		<title>Making good a cracked footpath</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18467</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18467</guid>
		<pubDate>Thu, 20 Aug 2026 11:33:40 +0100</pubDate>
		<author>thebeacon</author>
		<description>
			<![CDATA[Hello,<br /><br />I’m seeking some advice on making good the pathway at the front of my house. Its currently a 50-100mm slab of concrete which has some cracks and a drain in. The water currently runs towards and pools in front of the door. <br /><br />I would like to repair the footpath and add a slight ramping in front of the door to direct the water to run away from the house. The entire path is about 2.6 x 1.3m. I imagine some areas would need 40mm while others less than 10mm. <br /><br />I’d rather not break out the entire slab and add a resin based concrete product on top. Does anyone have any experience or advice with doing this? I have been looking at Cretex® EP Mortar (https://polycote.com/contact/) as a possible option to use. <br /><br />Thanks,<br />Tom]]>
		</description>
	</item>
	<item>
		<title>MVHR, heatwaves, chiller?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18451</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18451</guid>
		<pubDate>Thu, 02 Jul 2026 12:54:37 +0100</pubDate>
		<author>john.connett</author>
		<description>
			<![CDATA[<p >My house in Cambridge had a low energy renovation around 15 years ago with triple glazing, increased thermal insulation, solar thermal system, thermal store and MVHR. The MVHR unit is a Vent-Axia Sentinel Kinentic BH.</p> <br /><p >For most of the time since it was installed it has worked very well and I rarely needed to open any of the windows. However, during the recent Amber Heat Alert the house overheated badly. Possibly the high humidity made it worse than in earlier years or my age and, maybe medication, made me less resilient.</p><br /><p >My suspicion is that during an extended heatwave with tropical nights the MVHR is unable to maintain comfortable indoor temperatures. With or without a summer bypass, if the air temperature is over 35º C outside then the MVHR will import that air. Even if the air temperature drops lower overnight it can't catch up and the house continues to retain the heat, made worse by the high quality of thermal insulation.</p><br /><p >Some form of air cooling may be required! My back garden is nowhere near big enough for a ground-coupled heat exchanger so active cooling may be an option.</p><br /><p >I have seen an example where a reversible heat pump was connected to a water/air duct heat exchanger (eg. Zehnder ComfoPost). However, my house has a gas boiler.</p><br /><p >Has anyone else experienced similar problems or can suggest possible solutions?</p>]]>
		</description>
	</item>
	<item>
		<title>Water prices</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18466</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18466</guid>
		<pubDate>Sun, 16 Aug 2026 17:16:07 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />The headline on the front of today's Telegraph is what can only be described as 'surge pricing' for water during droughts.  The aim is to encourage us to use less water.<br /><br />This really anger me as we have a 6k liter rainwater collection tank and apart fro the fact that I'm not paying for incoming and by default, sewerage charges for using that water, I am unlikely to get any consideration for the fact that I am using less treated water than most houses.<br /><br />With all the building regs we have in place, surely it makes sense that every new build, whether single houses or estates, must have a large rainwater collection to be used for toilet flushing.  After all, every new build has to have a large soak-away, so why not collect that water before it goes to the soak-away?<br /><br />It is absolute madness to flush expensively treated, potable water down the lavatory.<br /><br />Now I'm off my soapbox!!]]>
		</description>
	</item>
	<item>
		<title>Solar Panel Fire</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18440</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18440</guid>
		<pubDate>Thu, 28 May 2026 20:27:00 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />Just seen this on the Mail on Line web site.<br /><br />https://www.dailymail.com/news/article-15854881/solar-panels-explode-home-explodes-flames-family-inside-escape.html<br /><br />Will we ever hear why this happened?  Bet the estate developers will have a nightmare with all the other owners wanting reassurance their solar panels will not catch fire.  There is a 100 Taylor Wimpey built estate near me and they all have solar panels.]]>
		</description>
	</item>
	<item>
		<title>diseased or rotten oak in external application</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=12562</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=12562</guid>
		<pubDate>Tue, 16 Sep 2014 20:27:21 +0100</pubDate>
		<author>northumbrian</author>
		<description>
			<![CDATA[Six years ago we installed some oak sleepers in soldier format for a client. We import the oak 400 sleepers at a time and use it for many varied external applications. We concreted the sleepers into the ground and told the client there was no great need for a treatment and that they would weather naturally and last a long time.<br />The client decided to treat the sleepers in a black treatment(variety not known at this time), and now is complaining that some have rotted.<br />ALL the other applications we used the same sleepers for are absolutely fine.<br /><br />Can anyone shed any light on why this rot may have occurred in a relatively short period. Could it be something in the soil which surrounds their feet?<br />Could it be moisture that has been trapped in by a non breathable treatment?<br />Any suggestions would be welcomed as we have used green oak for years without a problem<br /><br />Thanks in advance]]>
		</description>
	</item>
	<item>
		<title>Acoustic insulation between floors in old house</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18464</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18464</guid>
		<pubDate>Mon, 03 Aug 2026 18:19:19 +0100</pubDate>
		<author>reed</author>
		<description>
			<![CDATA[I am looking for advice for acoustically insulating a 280mm void between ground floor and first floor. I have installed internal timber stud walls with mineral wool slab insulation on the external walls of my late Victorian house, I have insulated the suspended floor downstairs and I will insulate the loft space in the bedroom above.  I have lifted the floorboards with a view to sanding them and relaying them in both bedroom and lounge with no carpet above. The old ceilings are down and I have not yet installed new ceilings. I need to reduce the drum effect which will exist if I do not install some sort of acoustic insulation between the floors. I would prefer not filling the whole enormous 280mm void with insulation for cost reasons and also I am not averse to leaking some heat from the lounge (woodburner heated) to the bedroom above. Am looking at various solutions but would happily receive comments on:<br />1. layer of insulation slab (Knauf RS45) next to plasterboard ceiling of lounge. Void above to the floor boards of the bedroom. What thickness slab? will the void above slab be a significant acoustic issue?<br />2. thicker layer of rolls of acoustic or loft insulation. Should be cheaper but I presume less effective? What thickness?<br />3. combination of solutions 1 and 2 but it seems a bit labour intensive and costly.<br />4. Decouple the ceiling by laying battens on the lower side of the joists before fixing plasterboard. How much impact does decoupling have? Not my preferred option due to limited height between the ceiling and the top of my windows<br /><br />Many thanks]]>
		</description>
	</item>
	<item>
		<title>Toilet Seals</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18457</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18457</guid>
		<pubDate>Tue, 21 Jul 2026 19:02:37 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />In my continuing quest to find a way to thread a CAT6 cable from the loft to the office, it may (only may?) be useful to remove the toilet to allow better access to the small area of floor below the pipe.<br /><br />Not a big job, just a couple of screws and wiggle it free from the fittings.  Of course, I would have ensured the cistern is empty.<br /><br />But the toilet has been in place for around 15 years and I am wondering if the various seals  should be replaced when re-installing, or are they all OK to reuse?  Of particular concern would be the two yellow seals, which I assume are not replaceable.  I would give a smear of silicone grease around the seal before reinstalling.<br /><br />Your thoughts most gratefully taken on  board.<br /><br />Thanks]]>
		</description>
	</item>
	<item>
		<title>Replacing wind turbines</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18462</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18462</guid>
		<pubDate>Wed, 29 Jul 2026 16:49:47 +0100</pubDate>
		<author>tony</author>
		<description>
			<![CDATA[I recently read about a scheme to replace wind farm turbines with new ones. Their idea was to remove the existing ones and put new ones up, much bigger ones. It might seem like a good idea because because all the cabling infrastructure will already be there but of course it won’t be suitable because the the output of the new wind turbines will probably be something like 10 times as much as as existing ones so the cables would need to be upgraded anyway.<br /><br /> My intention is that it’s crazy to take down in turbines that still useful. Why not? Just put the new ones up somewhere else then we’d have both the old ones and the new ones all functioning?]]>
		</description>
	</item>
	<item>
		<title>Shower</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18461</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18461</guid>
		<pubDate>Wed, 29 Jul 2026 13:53:50 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />Me again!!!<br /><br />I frequently feel that design somehow does not improve the function, and this is exactly the case.<br /><br />As in the two photos below, I have one of these bath tap shower fittings.  In the lower photo, push the right thing and it switches from bath filling to shower.  But!!!!<br /><br />Frequently, either this does not happen or if it does, the design malfunctions and upon turning the water off, it will not revert to bath or most frequently, supplies both shower and bath at the same time.<br /><br />The left spring sits in a recess in the body of the tap, so  should all be locked in place.  Disassembly usually shows one of two things:  1/ The spring has somehow, become dislodged or 2/ one of the O rings has been forced by water pressure from its seat.  The water is running at 3 bar because that is the recommended pressure for the softener.<br /><br />How to resolve the all to frequent dismantling beats me.  It happens pretty much every couple of months.  I have investigated  replacing the tap unit, but  want the same, which of course is either no longer available or is surplus stock for around a very profitable £250.<br /><br />Having dismantled, reset whatever is unset, reassembled, it will work as it should for a few months, then the cycle repeats itself.<br /><br />Grateful for any insight into how to ensure the push button works every time as it should.<br /><br />Thanks and toodle pip]]>
		</description>
	</item>
	<item>
		<title>Old window</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18463</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18463</guid>
		<pubDate>Thu, 30 Jul 2026 16:47:39 +0100</pubDate>
		<author>tony</author>
		<description>
			<![CDATA[Just saw a window over 350 years old - yea it was a wooden window frame set into a stone surround. <br /><br />https://share.icloud.com/photos/053drZp42Ur_dTRWMN-hRQb8w<br /><br />Hope the link works]]>
		</description>
	</item>
	<item>
		<title>Aerogel insulation</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17579</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17579</guid>
		<pubDate>Mon, 26 Sep 2022 08:21:13 +0100</pubDate>
		<author>Sandfordbarn</author>
		<description>
			<![CDATA[Hi, I'm refurbishing a stone  barn, and am looking at aerogel.<br /><br />Does anyone have any experience applying it directly to stone walls, in particular the blanket rather than the boards. Then direct plaster/lime over that?<br /><br />I'm keen on this finish as I'd prefer a more irregular finish, rather than flat boards.<br /><br />I've seen some European company are applying aerogel render externally (with aerogel granules in the render mix), but I've not heard back from any of them.<br /><br />Any shared experiences on this would be very helpful - it seems to be a revolutionary product?]]>
		</description>
	</item>
	<item>
		<title>Hole in plasterboard</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18459</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18459</guid>
		<pubDate>Mon, 27 Jul 2026 07:25:39 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />Continuing with a different topic but still related to my CAT6 cable saga, I think I am planning to cut at least one hole, and maybe two 10 cms holes into the plasterboard ceiling.<br /><br />My wife wiggled the fish rod (oven sized earth wire) and I can clearly hear that it is kinda where I want it, but nevertheless, still around 10 cms+ away from where I can grab hold.  The option is to drill an access hole ito the plasterboard ceiling, behind which is the Warmcel!!!<br /><br />On the destination side, it is not a major issue as we have emptied the wardrobe and the dust can fall onto the shelf.  But the office side (which is where the wire is at the moment, has all the office  equipment below.<br /><br />Apart from removing, disconnecting everything, dust sheets, etc, is there a way to drill a hole in plasterboard that does not send dust everywhere?  I've seen vids on a small, drill-bit hole but not 10cms.  Of course, I would use a vac but that is challenging with 10 cms.  Perhaps a padsaw? <br /><br />Your thoughts appreciated.<br /><br />Thanks<br /><br />Rex]]>
		</description>
	</item>
	<item>
		<title>Wallpaper onto lime plaster</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18460</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18460</guid>
		<pubDate>Tue, 28 Jul 2026 11:17:41 +0100</pubDate>
		<author>WillInAberdeen</author>
		<description>
			<![CDATA[How soon can you wallpaper onto fresh lime plaster, does it need specific wallpaper paste, anything I should know about it?<br /><br />I put breathable wood-fibre IWI with Lime Green Solo plaster on the external stone wall of a room, and want to hang plain lining paper (no vinyl) to match the existing finish on the other internal walls. I will paint the lining paper with some breathable paint, probably Earthborn.<br /><br />Lime Green say they don't recommend wallpapering their plaster but didn't explain why.<br /><br /><br />ISTM that lime plaster walls have traditionally been wallpapered for 100s of years including in my house, so not sure what the issues might come up?]]>
		</description>
	</item>
	<item>
		<title>Home Energy Model</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18051</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18051</guid>
		<pubDate>Fri, 15 Dec 2023 09:32:39 +0000</pubDate>
		<author>djh</author>
		<description>
			<![CDATA[Will in Aberdeen spotted the Home Energy Model initiative: https://www.gov.uk/government/consultations/home-energy-model-replacement-for-the-standard-assessment-procedure-sap but can't start an appropriate thread. So here is one.]]>
		</description>
	</item>
	<item>
		<title>Oak Frame, Oak Sarking, Roof Insulation</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18458</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18458</guid>
		<pubDate>Thu, 23 Jul 2026 18:04:13 +0100</pubDate>
		<author>DrewWiley</author>
		<description>
			<![CDATA[I have been building an Oak framed out building for a number of years for use all year round, it is 10mx5m. It will have a heated floor.<br /><br />On the inside Its open oak rafters, then oak square edge sarking with 3mm spacing using random sized boards. I dont want any insulation on the inside of the building as it looks lovely  inside.<br /><br />Externally i dont want any soffits or fascias just open rafters and perlin ends.<br /><br />My dilema is insulating the roof, my initial thought is as follows<br /><br />the sarking is pretty flat however not perfectly flat.<br /><br />Rafters are 80mm so on top of the sarking lay a vapour membrane (i need to this to be black as i will see it through the sarking gaps inside) ill then screw using stainless spax washer heads a 80mm wide, 50mm deep oak battens on top of the rafters (externally). i will then use kingspan 50mm k107 in between each of these new battens (from the ridge to the end of roof). then my normal roofing approach counter batten with draping roofshield followed by pantiles. Would this be a suitable approach?<br /><br />I would need to use an oak batten running the length of the roof that is 50mm tall to stop the insulation sliding down and providing a more decorative finish.<br /><br />This all sounds like a mix between warm and cold.<br /><br />Any suggestions would be welcome, i did look into TLX Gold etc but wasn't keen.<br /><br /><br />Or do i simply use something like Solitex Fronta Quattro, then PIR, then counter battens then tiles.<br /><br /><br />Thanks]]>
		</description>
	</item>
	<item>
		<title>Kitchen worktop replacement</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18436</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18436</guid>
		<pubDate>Fri, 15 May 2026 11:42:58 +0100</pubDate>
		<author>djh</author>
		<description>
			<![CDATA[We're thinking of replacing our kitchen worktops. We have laminate worktops and some of the glue-on end pieces keep coming off and get damaged.<br /><br />We're considering getting a granite or quartz overlay rather than a full worktop replacement. Does anybody have any experience of these? What's your preference for replacing worktops?]]>
		</description>
	</item>
	<item>
		<title>Roof ventilation and summer overheating</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18456</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18456</guid>
		<pubDate>Fri, 17 Jul 2026 19:42:58 +0100</pubDate>
		<author>wholaa</author>
		<description>
			<![CDATA[With the recent hot spell across much of Europe, overheating in homes is back in the headlines. As expected, there's plenty of discussion about air conditioning and the trend towards very large south facing windows, but much less attention seems to be paid to roof ventilation.<br /><br />I'm not a builder or roofer, so this is a genuine question rather than a statement. It seems to me that relatively few homes have the recommended level of ridge ventilation. Perhaps I'm simply not noticing the more discreet ridge vent systems, but ridge ventilation appears to be much less common than soffit ventilation.<br /><br />In room in roof houses, particularly where rigid insulation has been poorly installed, could inadequate roof ventilation, especially a lack of ridge ventilation (lacking the stack feect), be a significant contributor to overheating? I'd be interested to hear the views of those with experience in roofing or building physics.]]>
		</description>
	</item>
	<item>
		<title>Eco-friendly Shower tray &amp; enclosure ie low embodied carbon</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18454</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18454</guid>
		<pubDate>Tue, 14 Jul 2026 20:36:57 +0100</pubDate>
		<author>stonecold</author>
		<description>
			<![CDATA[Any suggestions for something with low embodied carbon, or if there is even some line of certification to look for when searching?<br /><br />I would rather avoid a plastic shower tray unless it's 99+% recycled. Steel is very high embodied energy.<br /><br />What do all those Carbon Lite home fit? Where do I even start?]]>
		</description>
	</item>
	<item>
		<title>Solar irradiance</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16444</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16444</guid>
		<pubDate>Mon, 03 Feb 2020 17:30:32 +0000</pubDate>
		<author>djh</author>
		<description>
			<![CDATA[Does anybody know of a source of solar irradiance data?<br /><br />Specifically broken into fairly small areas?<br /><br />I'm trying to forecast how much heat my house needs each day. Apart from the internal and external temperatures, I think the other major factor is solar gain. So I'd like to get hold of records of irradiance over the past year or more and also a 24-hour forecast of irradiance (or longer :)<br /><br />Historical data I can estimate from my solar generation records but it would be good to have an external source to compare against, and a forecast is the most important bit.]]>
		</description>
	</item>
	<item>
		<title>Best Apps for Energy use &amp; PV export monitoring</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17117</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17117</guid>
		<pubDate>Tue, 06 Jul 2021 11:47:21 +0100</pubDate>
		<author>jms452</author>
		<description>
			<![CDATA[Having recently had a smart meter fitted there are apps out there that can tie into your meter giving you accurate half hourly monitoring without additional hardware.<br /><br />For example I found an app called Octopus Compare that I can code to my smart meter and look at what different tariffs would cost me. I can also see from the Octopus dashboard my usage and export in half hourly blocks so this data should also be available with the right logins.<br /><br />So there must be some cool apps out there that monitor, advise, correlate but when I search I'm mainly finding proprietary software that talks to specific brand inverters.<br /><br />Any recommendations?]]>
		</description>
	</item>
	<item>
		<title>Skylights, roof windows and clerestory skylights</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13951</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13951</guid>
		<pubDate>Mon, 11 Jan 2016 16:22:22 +0000</pubDate>
		<author>tony</author>
		<description>
			<![CDATA[Roof windows seem to cool rooms too much.<br /><br />U values assume steady state and an indoor and out door temperature <br /><br />But skylights can radiate heat to outer space which is at absolute zero.<br /><br />This heat loss dominates on any clear night.<br /><br />Should heat losses from these be reassessed?]]>
		</description>
	</item>
	<item>
		<title>Nordan v Allan Brothers</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18452</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18452</guid>
		<pubDate>Fri, 03 Jul 2026 00:04:36 +0100</pubDate>
		<author>Victorianeco</author>
		<description>
			<![CDATA[Any preference even looking at 3G Alu-Clad?]]>
		</description>
	</item>
	<item>
		<title>AAHP in everyday houses</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18450</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18450</guid>
		<pubDate>Tue, 30 Jun 2026 09:59:42 +0100</pubDate>
		<author>fostertom</author>
		<description>
			<![CDATA[I've reached the point of considering air to air HP (AAHP), maybe with cooling aka AC, as a lowest-intervention solution for boiler-replacement in ordinary small houses (whether 'modern box' or old/rambling cottage) which no one's planning to comprehensively insulate, even incl ones with no existing central heating of any kind.<br /><br />I need to get up to speed with the varied considerations, like we've gradually learned with wet systems, UFH, ASHP etc. Not least grant aid. Aware of the horrors of 70s/80s cheapo air-heating, and duct-routing issues. And DHW.<br /><br />Any pointers?]]>
		</description>
	</item>
	<item>
		<title>Air Con</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18449</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18449</guid>
		<pubDate>Sun, 28 Jun 2026 13:44:21 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />There was a recent article in the newspaper regarding the a/c numbers in different countries.  Japan (my wife is Japanese) has around 91% domestic a/c installations, the UK, less than 5%.<br /><br />My wife is really, really keen to get an a/c in our house.  3g, 180mm of Warmcel insulation; I don't think it is going to happen as I'm not drilling large holes through the glazing or walls.  She even thanks we could replace one of the 'smaller' glazing panels to accommodate the a/c pipe.  No way Jose!!!<br /><br />Her further research finds this kind of unit:  https://nessally.co.uk/    Apparently, according to her, they are very popular and very good.  My feeling is, it is all marking hype and a money making scam.<br /><br />Is there any 'new' technology that makes these portable a/c units as good as the blurb suggests?  Are they generally any good or essentially, just an expensive fan that will be in the skip in a few years time?<br /><br />Grateful for your thoughts and opinions.]]>
		</description>
	</item>
	<item>
		<title>Skylights</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18448</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18448</guid>
		<pubDate>Sat, 27 Jun 2026 16:02:43 +0100</pubDate>
		<author>owlman</author>
		<description>
			<![CDATA[I'd like to introduce more natural light into my bungalow living room space approx 8M x 8M. Skylights seemed to be the obvious answer  rather than knocking down walls. However,  the loft space is of a Fink trussed construction which I can't cut or change.<br /> These large trusses are 70mm x 35mm timber section at 450mm centres and with plenty of length eaves to ridge. I'd seen firms that do long narrow 3g  fixed lights for this sort of application. but I'm unsure as to how they'd look from the interior. I'd thought of three in a row on alternate truss spaces with 2 x flat ceiling sections between. It's a pantile roof so flashing detail could get messy.  The good news is its N. facing.<br />Can anyone spot any flaws in my idea? Has anyone attempted skylights in a trussed roof situation and does anyone know of a decent firm who make the lights.]]>
		</description>
	</item>
	<item>
		<title>Telegraph Article - Eco rebuild</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18447</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18447</guid>
		<pubDate>Tue, 16 Jun 2026 12:03:45 +0100</pubDate>
		<author>borpin</author>
		<description>
			<![CDATA[Not sure if this link will work, but this is a really good looking house IMHO.<br /><br />https://www.telegraph.co.uk/gift/c79c96400f3a8bff<br />https://www.telegraph.co.uk/money/net-zero/i-spent-900000-creating-the-ultimate-eco-home/<br /><br />One thing I noted is that he is funneling his MVHR extract into a 'cupboard' around the Heatpump. That sounds like an excellent idea.]]>
		</description>
	</item>
	<item>
		<title>Batteries</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18430</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18430</guid>
		<pubDate>Fri, 08 May 2026 17:57:27 +0100</pubDate>
		<author>djh</author>
		<description>
			<![CDATA[What's the state of play with batteries these days?<br /><br />I am generally aware of the 'big' batteries supplied by the likes of Tesla, Fox ESS etc<br /><br />There now also seem to be much smaller products aimed at the 'balcony solar' market and I don't know anywhere near as much about them :cry: So ...<br /><br />(1) are they actually legal and what regulations apply?<br />(2) does anybody know which ones are good and which ones to avoid?<br />(3) a lot are aimed at integrating with balcony solar, but I already have solar on my roof with microinverters, so I just want an AC connected battery. Does that change things?<br />(4) how are they controlled - which require cloud or other external connections and which can be controlled locally somehow?<br /><br />I'm sure I'll think of some more questions, but that'll do for now! :bigsmile:]]>
		</description>
	</item>
	<item>
		<title>(AI) data centres, water, geo</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18442</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18442</guid>
		<pubDate>Sat, 06 Jun 2026 08:22:14 +0100</pubDate>
		<author>minisaurus</author>
		<description>
			<![CDATA[I’m surprised water consumption by data centres is an issue. Presumably, in countries with at least half-functioning planning systems, a centre could be forced to 1) use geo energy for primary cooling, and 2) build a closed circuit water circulation (with filtration) system for the needed-in-summer cooling fans, with a restriction on the amount of drinking water the centre be allowed to use per annum? <br /><br />My workplace - large hospital - achieves all cooling needs using geo energy - approx 100 holes approx 70m depth. We even heat space & water (almost) year round using same energy & some extra electricity to get the temp up from 40C to 68C<br /><br />If I wanted to build a data centre, I’d do this.<br /><br />However, I don’t want to build one :)]]>
		</description>
	</item>
	<item>
		<title>Finally finished all the eco energy improvements! De-carbonized 190 year old house!</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18445</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18445</guid>
		<pubDate>Mon, 15 Jun 2026 03:08:20 +0100</pubDate>
		<author>stonecold</author>
		<description>
			<![CDATA[Its finally finished! <br /><br />The house is no longer stone cold, damp, with slugs getting in. It's warm, comfortable and the bills have dropped loads.<br /><br />Since the planning started 4 years ago we have FINALLY got the last job done!<br /><br />Here's the main jobs done<br />- LPG cooker with non-fan oven ?? induction hob and electric fan oven<br />- Oil boiler and immersion heater ?? Heat pump and central heating refit<br />- Solar PV ? with large battery, and gateway for off-grid<br />- EV charger<br />- Solid wall insulation - Diathonite lime/cork EWI - from 2.0U to 0.60U<br />- Triple glazed timber/alu - all but 2 windows, 3 doors<br />- Raised concrete patio bridging damp course ?? lowered porcelain patio tiles<br />- MVHR and removed bathroom and kitchen extractors, recirculating cooker hood <br />- Wood and recycled supasoft loft insulation top-up<br />- All light fittings now use replaceable LED bilbs ?<br /><br />oh and we needed a new roof!<br /><br />Thank you to everyone for their suggestions and answering so many questions. I'm so glad GBF is still here - I can't remember who is currently running things but many thanks! There's nowhere similar. :cool::cool::cool:<br /><br />No doubt I will still post since there are other important repairs needing doing plus some accessibility improvements, I'm hoping to get eco-friendly stuff for. :cool:]]>
		</description>
	</item>
	<item>
		<title>Boiler Upgrade Scheme grant now £9,000 for oil or LPG replacements</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18444</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18444</guid>
		<pubDate>Sun, 14 Jun 2026 23:31:43 +0100</pubDate>
		<author>stonecold</author>
		<description>
			<![CDATA[Very little coverage of the grant increasing to £9,000 (from £7,500) for moving to a heat pump and even hard to confirm on UK gov websites...<br /><br />England and Wales only (Scotland has a £1,500 rural uplift already).<br /><br />LPG or oil boilers only so mostly rural/off-grid homes.<br /><br />https://www.airahome.com/en-gb/blog/heat-pump-grant-9000-uk<br /><br />I only heard about this last month in a quote for a heat pump (now installed! ?)]]>
		</description>
	</item>
	<item>
		<title>Retrofit project</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18435</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18435</guid>
		<pubDate>Wed, 13 May 2026 08:29:03 +0100</pubDate>
		<author>ChrisGT</author>
		<description>
			<![CDATA[Starting a retrofit of  a new house shortly. Its only 25 years old! <br />Cavity walls with 80mm glass wool batts, clod roof, dot and dab plasterboard walls and a terrible airtightness test<br />Planning to:<br /><br /> Fill cavities below dpc with ecobead. <br />Create warm roof by increasing rafter depth with intello membrane on inside and blown in gutex or warmcel and solitex plus counterbattens and battens above.<br /><br />150mm eps from 300mm above ground to foundation fixed to exterior brick  walls. Timber frame made from 2 x 50x50mm timber with noggins to create 150mm cavity to be filled with gutex and 40mm rendered woodfibre board outside. Intello against bricks connecting to foundation and roof vapour control layer. <br /><br />Does this sound like a good plan. Have considered parge coat in wall or passivpurple but intello seems cheaper and more eco. <br /><br />Triple glazed windows hung outside current wall in picture frame. <br /><br />Any suggestions or thoughts on improvements?]]>
		</description>
	</item>
	<item>
		<title>PHPP or Similar?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18441</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18441</guid>
		<pubDate>Wed, 03 Jun 2026 20:41:28 +0100</pubDate>
		<author>Victorianeco</author>
		<description>
			<![CDATA[Is this easy to use? Or anything alternative? <br /><br />Looking for my own interest more than anything?<br /><br />Any tips or thoughts?]]>
		</description>
	</item>
	<item>
		<title>Air-to-air heat pumps</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18371</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18371</guid>
		<pubDate>Tue, 18 Nov 2025 17:34:03 +0000</pubDate>
		<author>djh</author>
		<description>
			<![CDATA[So, the government has included air-air heat pumps in the BUS (see https://www.gov.uk/government/news/discounts-for-families-to-keep-warm-in-winter-and-cool-in-summer ), which has set me thinking about them again. Does anybody have any ideas about whether this will decrease or increase prices, and when. Or how to find a competent and trustworthy installer? (in Suffolk if it matters)  And about any specific products?<br /><br />PS They've also included subsidies for 'heat batteries', but since heat batteries are now more expensive than electrical batteries for the same capacity, it seems like another poorly thought-out scheme!]]>
		</description>
	</item>
	<item>
		<title>Solar pv edge</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=15352</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=15352</guid>
		<pubDate>Wed, 18 Oct 2017 19:25:28 +0100</pubDate>
		<author>revor</author>
		<description>
			<![CDATA[Does anyone have a view of whether solar edge is worth the extra expense? I have been quoted Â£7K for a 14 panel 4Kw system and do not know whether this is good value or not.]]>
		</description>
	</item>
	<item>
		<title>Help with Tanking/breathability</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18439</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18439</guid>
		<pubDate>Tue, 26 May 2026 16:23:27 +0100</pubDate>
		<author>Brightonreno21</author>
		<description>
			<![CDATA[Hello<br />We live in Brighton and have a Victorian terrace which is south facing and high on a hill so tends to take a bit of a battering from rain and wind. A lot of the houses on our road suffer with damp in rooms at the front<br /><br />On moving in, we noticed active damp in a master room at the front of the house. The opinions we got at the time where either very expensive damp proof materials (chemical injections etc), or we were offered the suggestion of using tanking slurry to waterproof the wall. This has effectively worked, that room is now dry.<br /><br />We are now doing a Reno and having read much more about breathability we’ve started to worry about this. We are wondering if we get the render done in breathable lime render, could we keep the wall as it is (remove the tanking will also be damaging for it we understand)<br /><br />We’d welcome views on how much of an issue it would be to have one room be tanked/not breathable - if we then get the render done breathably. <br /><br />Whilst we are reluctant to invasively remove the tanking we don’t want to be storing up too many problems]]>
		</description>
	</item>
	<item>
		<title>4.5+ sqm 20mm thick aerogel insulation</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18438</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18438</guid>
		<pubDate>Tue, 26 May 2026 11:31:06 +0100</pubDate>
		<author>mdaley</author>
		<description>
			<![CDATA[I have around 4.5m² of surplus 20mm thick aerogel blanket rolled up.  I bought it for insulating a room where I didn't want to lose much space.  It is exceedingly efficient with a thermal conductivity of 0.017W/mK at 20°C, and it is A-rated for non-combustability.<br /><br />Given that it was rather expensive to obtain, I would like to sell this surplus.  I can see from the Passive House Store that, from them, it would cost around £230/m².  I'm willing to part with it for around half that as I need it to be out of the way.  So I would be happy to accept £500 for it.<br /><br />I can provide a spec sheet and a CE mark cert.<br /><br />There are various offcuts that could be used too.  I will throw these in free or you could negotiate a price if you just want a small amount.  For example, I've used small amounts when building extra insulation into existing doors.<br /><br />The way I used it was to place it between battens and put boards over the top.  It's on the internal side of an already insulated cavity wall so I decided to not be too worried about cold bridges from the battens and fixings.  Ideally you would want a continuous layer with no battens but all my attempts at this failed, given my lack of appropriate skill and experience.<br /><br />I prefer pickup from my location in Bristol.  Wrapping and transport would be hard as the roll is quite heavy.]]>
		</description>
	</item>
	<item>
		<title>Ants</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18428</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18428</guid>
		<pubDate>Tue, 05 May 2026 18:28:24 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />While cleaning today, I found in the dark recess of a cupboard that is effectively, our plant room (HW cylinder and boiler cupboard)  a pile of soft stuff; no idea what it is but vacuumed it.  Thought it may have been coming from some insulation around the top of the wall hanging boiler.<br /><br />Checked again just now, and at the back of the cupboard on the floor, I see ants.  They appear to be coming from a very small hole where the Fermacell and screed meet.<br /><br />I don't like eradicating insects but I also don't want ants nesting in the timber frame / Warmcell.  Google tells me how to prevent them coming into the house but what is the best way to eradicate them from where I cannot see?<br /><br />Thanks]]>
		</description>
	</item>
	<item>
		<title>Learn about lead above glass</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18434</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18434</guid>
		<pubDate>Wed, 13 May 2026 05:43:49 +0100</pubDate>
		<author>tony</author>
		<description>
			<![CDATA[I’m certain that I’ve done this one before but can’t find it. I talked about having lead above glass.<br /><br />See this picture : - (also further down the thread)<br /><br />https://share.icloud.com/photos/066qjqEKhBi6whb1qP5FrnWUg<br /><br />https://www.dropbox.com/scl/fi/15k1oufc1bdnmtthlvbe8/lesson-to-learn.heic?rlkey=sgq0970dw33medi6mk29ceupv&amp;st=vyoi58g9&amp;dl=0<br /><br />The white streaks running down the Glass are caused by rainwater slightly dissolving the lead, which you can just see above the glass, and taking tiny amounts of lead oxide down the glass. You might think that you could just clean this off easily. You can’t. The lead oxide etches the surface of the glass irreversibly. Ugly and fully preventable. <br /><br />All architects, glaziers, conservatory manufacturers and in general anyone who specifies glass for use on roofs needs to understand this. And never use lead above glass.]]>
		</description>
	</item>
	<item>
		<title>EWI + Cavity Fill versus cavity fill only</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18429</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18429</guid>
		<pubDate>Tue, 05 May 2026 20:28:22 +0100</pubDate>
		<author>Victorianeco</author>
		<description>
			<![CDATA[I am looking for a comparison of the real-world savings and practical implications for two insulation strategies on a 1960's uninsulated cavity wall property.<br /><br />Specifically, I would like to compare:<br /><br />1. Cavity Fill Only: Filling the cavity with 80mm expanded polystyrene (EPS) graphite beads while keeping new windows (3G) within the traditional layer.<br />2. Cavity Fill plus External Wall Insulation (EWI): Performing the above and adding a 120mm EPS board external layer.<br /><br />While the latter is more thermally efficient, it is also more labour and material intensive. I need to evaluate the payback period based on current material costs and research.<br /><br />Furthermore, I have concerns regarding the impact of the 120mm EWI on the property's interior. Extending the wall thickness may reduce natural light and affect viewing angles from within the room, particularly at the 30 to 45-degree angles we currently enjoy. There is also the potential loss of the window frame's aesthetic &quot;framing&quot; effect to consider.<br /><br />What are your current thoughts on these two approaches based on up-to-date material costs and thermal performance research? Please let me know if there are any other factors I should consider at this stage.<br /><br />Thanks]]>
		</description>
	</item>
	<item>
		<title>vacuum glass</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18432</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18432</guid>
		<pubDate>Mon, 11 May 2026 21:04:47 +0100</pubDate>
		<author>chrisinbrighton</author>
		<description>
			<![CDATA[Has anyone here used vacuum glass panels?<br />It appears to last way longer than sealed units and a lot better performance.<br />My only concerns are how visual the small spacer dots are and the width of the packer.]]>
		</description>
	</item>
	<item>
		<title>aluminium roofing nails</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18424</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18424</guid>
		<pubDate>Fri, 17 Apr 2026 19:53:40 +0100</pubDate>
		<author>chrisinbrighton</author>
		<description>
			<![CDATA[Has anyone got any views on using aluminium nails for a slate roof. My roofer says they are better that copper as they `give ` a bit and have bigger heads.<br />My own experience of aluminium on bikes is that it can go brittle with age.<br /><br />Thanks]]>
		</description>
	</item>
	<item>
		<title>Do i need a soil vent pipe in front garden?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18433</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18433</guid>
		<pubDate>Tue, 12 May 2026 08:21:32 +0100</pubDate>
		<author>thebeacon</author>
		<description>
			<![CDATA[I have been renovating a Victorian Terrace house. I had it re-plumbed a few years ago. When doing so a durgo vent was fitted in the loft.<br /><br />While digging in the front garden recently I found a capped old concrete/clay pipe that leads back to the main soil drain.<br /><br />My question, was this once a soil vent pipe? And if it was should I reinstate it? We had to lower the garden in front of the house, so now it sticks out the ground. I either want to cut the pipe to lower it and recap it or fit a soil vent pipe if it’s required. Other houses in the area have what appears to be a vent in their front gardens. <br /><br />Cheers,]]>
		</description>
	</item>
	<item>
		<title>Shattering</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18427</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18427</guid>
		<pubDate>Mon, 04 May 2026 19:31:46 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />Neighbour has gone on holiday and asked me to keep an eye on their house, including giving some liquid refreshment to some plants.<br /><br />Looking up from the rear garden yesterday, this is what I see.  Went to check from the balcony and the glazing is presumably, toughened glass but also laminated.  It is only the inner pane that has fractured.  Wheat could possible be the cause?<br /><br />Toodle pip]]>
		</description>
	</item>
	<item>
		<title>Trustworthy trades to assess/install ASHP and solar panels</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18426</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18426</guid>
		<pubDate>Fri, 01 May 2026 15:39:53 +0100</pubDate>
		<author>Louis036</author>
		<description>
			<![CDATA[Hi everyone<br /><br />I am looking into ASHP and solar panels for the house I moved into recently. I need a feasibility survey and want to find a trustworthy surveyor and tradespeople. I am currently with Octopus Energy for gas and electricity supply, so I started there, but have had this weird experience where they kept not showing up for initial phone discussion appointments made with them. Three times - with no explanation from the survey department or their customer services. I have no faith that Octopus will be able to do the job if they can't even get this far.<br /><br />So I'm looking for trustworthy and reliable alternatives in the Havant, Hampshire area. Does anyone have experience of someone like that in this area, please?<br /><br />Many thanks,<br />L036]]>
		</description>
	</item>
	<item>
		<title>Peak Cluster CCS pipeline</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18425</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18425</guid>
		<pubDate>Sun, 19 Apr 2026 23:00:46 +0100</pubDate>
		<author>ChrisGT</author>
		<description>
			<![CDATA[CHESHIRE west Council is considering a motion to prevent this carbon capture and storage project going ahead in a couple of days. CO2 from several peak district cement factories will have the CO2 produced during production  removed and pumped out by pipeline into Morcambe Bay depleted gas fields. The cost, a mere 5 billion! Theres a lot of opposition, not sure whether just nimbyism  or maybe due to cost and unproven technologies' efficacy being exagerated. Would be interested in any views on other alternatives to enable co2 from this sector being reduce.]]>
		</description>
	</item>
	<item>
		<title>Hempblock - has anyone tried?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18421</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18421</guid>
		<pubDate>Sat, 11 Apr 2026 11:40:30 +0100</pubDate>
		<author>minisaurus</author>
		<description>
			<![CDATA[I thought these ones looked interesting: https://uk.hempblockinternational.com/ - load bearing, no mortar needed, insulation, noise reduction & presumably pretty green.<br /><br />Has anyone experience of them?  The positives are many, but what are the negatives? price I guess]]>
		</description>
	</item>
	<item>
		<title>Help with wet timber frame wall</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18423</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18423</guid>
		<pubDate>Wed, 15 Apr 2026 10:35:53 +0100</pubDate>
		<author>andyman99</author>
		<description>
			<![CDATA[Looking for a bit of advice please.<br /><br />Whilst starting to help my son renovate his bathroom we came across a rather unpleasant problem. The tiles on an external wall pretty much fell off and everything behind is very wet. <br />Construction: this “front” wall appears to be a simple timber frame structure. From outside to in: PVC cladding - roofing felt (what I would call old style felt not a breathable membrane) - timber frame filled with fibreglass type insulation - plasterboard. The water ingress does appear to have come from the inside. The timber structure is very wet, the insulation a sodden mess and the roofing felt disintegrates as you touch it. We have an insurance assessment this Friday but I would like to understand a way forward if possible before then. I think the main structural walls are brick, left and right whilst front and back appear to be this timber frame structure. 2 rooms across the front, bathroom and bedroom. No obvious signs of a problem in the bedroom front wall. I’m wondering how fixing this would best be approached? Any ideas welcomed]]>
		</description>
	</item>
	<item>
		<title>Supporting the Green Building Forum (/AECB)</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18361</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18361</guid>
		<pubDate>Tue, 07 Oct 2025 12:20:39 +0100</pubDate>
		<author>Nick Parsons</author>
		<description>
			<![CDATA[I see that, of AECB's £6500 target for the future development of GBF, £271 has been raised, with, I think, 30-something days of the 'campaign' to go. <br /><br />I'm just raising this in a new thread since I am not sure where it goes from here. I have a 'soft spot' for GBF, and was 'in' long enough ago not to have paid anything, but if we assume (I don't *know*) that the number of active users ('supporters') is relatively small I am not at all sure how the £6500 will be raised. I'd be sad to see it go, but maybe that has to be??<br /><br />Just some random ramblings, but any other thoughts would be useful to users and, I am sure to AECB as new 'Guardians of GBF'.]]>
		</description>
	</item>
	<item>
		<title>Prestressed stone massively cuts embodied carbon</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18414</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18414</guid>
		<pubDate>Thu, 12 Mar 2026 08:19:49 +0000</pubDate>
		<author>fostertom</author>
		<description>
			<![CDATA[This is interesting:<br />https://www.greenregister.org.uk/civicrm/?civiwp=CiviCRM&amp;q=civicrm%2Fmailing%2Fview&amp;reset=1&amp;id=5840&amp;cid=40824&amp;cs=f4a98d878cf7eb7a71342f57279ea33e_1773283838_720<br /><br />&quot;... research into stone structures to help move their use back into everyday construction.<br /><br />Standing three storeys tall, the Stone Demonstrator shows stone’s potential as a contemporary, low-carbon, structural material.<br /><br />Natural stone offers a route to cut carbon emissions sharply. Compared with a conventional reinforced concrete frame, the Stone Demonstrator drops embodied carbon by roughly 70%, and by around 90% when set against steel.]]>
		</description>
	</item>
	
		</channel>
	</rss>