<?xml version="1.0" encoding="utf-8"?>
	<rss version="2.0">
		<channel>
			<title>Green Building Forum - All Discussions</title>
			<lastBuildDate>Thu, 19 Nov 2026 05:04:10 +0000</lastBuildDate>
			<link>https://www.greenbuildingforum.co.uk/newforum/</link>
			<description></description>
			<generator>Lussumo Vanilla 1.0.3</generator>
			<item>
		<title>Solid floor or full fill EPS?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18327</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18327</guid>
		<pubDate>Fri, 01 Aug 2025 16:11:15 +0100</pubDate>
		<author>amin</author>
		<description>
			<![CDATA[I'm in the middle of renovating an Edwardian house and am looking for advice on floor insulation options.<br /><br />The house currently has a traditional timber suspended floor, which I initially planned to replace with a solid floor using foam glass aggregate. However, upon exposing the structure, I’ve found timber wall plates embedded in both the internal and external solid brick walls, supporting the joists above the slate DPC.<br /><br />If I go ahead with the solid floor, I’d need to remove these wall plates throughout. Has anyone done this before? Is it practical or more trouble than it’s worth?<br /><br />Alternatively, I’ve been pointed toward a full-fill EPS solution to insulate beneath the suspended floor. I have 250mm below the 100mm joists. Would this be viable given the embedded wall plates? I’m particularly concerned about the long-term risk of trapping moisture or causing rot at the joist ends or wall plates themselves.<br /><br />Interested in views from others who’ve dealt with this or have experience with either approach.<br /><br />Thanks!]]>
		</description>
	</item>
	<item>
		<title>Sliding Window</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18333</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18333</guid>
		<pubDate>Fri, 15 Aug 2025 13:45:52 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />We have two balconies and each has the same tilt / sliding window.  They are flush with the fixed window when closed, then pulled to open and a parallelogram mechanism brings them inwards to slide.<br /><br />One has developed a loose fixing and  although it works, when open, is not parallel with the fixed frame.  The issue is that the rod, which is fitted into the casting (red arrow) now slides in and out of the casting.  And I cannot see how it can be tightened.  Looks to me that when made, the rod was inserted and the ribbing just crimped to lock the two together, but knowing that does not solve my problem as I cannot remove anything.<br /><br />Epoxy will most likely not provide a permanent solution.  <br /><br />Any suggestions would be appreciated and / or a link to how this works.  <br /><br />Unfortunately, the Danish manufacturer of my windows went out of business X years ago so nothing available that I can find.<br /><br />Thanks and toodle pip]]>
		</description>
	</item>
	<item>
		<title>EWI: tanking EPS below DPC?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=10206</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=10206</guid>
		<pubDate>Tue, 26 Feb 2013 14:10:55 +0000</pubDate>
		<author>Shevek</author>
		<description>
			<![CDATA[In Volume 5, Gold Standard, of the CarbonLite Programme, Section 2.1.4 there's a detail showing the external wall insulation below DPC as "incorporating applied layer of waterproof tanking prior to rendering external face". <br /><br />Has anyone done this themselves? What did you tank the EPS with?]]>
		</description>
	</item>
	<item>
		<title>Shower</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18325</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18325</guid>
		<pubDate>Tue, 29 Jul 2025 13:16:02 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />Have a bath mixer tap with the facility to press the button for the shower.  Personally, I think that is is a clever but poor design, but what do I know?<br /><br />Every couple of months, the shower either will not work or when the bath is turned on, both bath and shower supply water.  The solution is to dismantle the shower button and generally, the culprit is the arrowed O ring  which the 3 bar has dislodged.<br /><br />After 15 years, perhaps I need a new O ring?  Not a problem but ...............<br /><br />When I have checked a couple of site, there are so many different types.  Nitron,  viton, EDPM, silicone, polymax, and more.  My guess is that I need something pretty basic but what?  Just plain vanilla rubber or EDPM?<br /><br />Really grateful for any suggestions.<br /><br />Thanks and toodle pip]]>
		</description>
	</item>
	<item>
		<title>Filling crawl space with hardcore and insulation under suspended timber floor</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18326</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18326</guid>
		<pubDate>Fri, 01 Aug 2025 12:47:05 +0100</pubDate>
		<author>j.neff</author>
		<description>
			<![CDATA[Hello<br />I think the following is a good method but would like this challenged by others.<br /><br />Overall plan: <br />EnerPHit of 1970s end terrace home in Dundee, masonry cavity wall (brick - 70 mm blowing wool insulation - AAC block), suspended timber floor. I live in the house so want to reduce internal disruption where practicable. I also want to avoid using large amounts of concrete so would like to avoid replacing the timber floor.<br /><br />Air tightness strategy:<br />Apply (maybe self-adhesive) air tightness membrane to outside of walls (once failing render/harling has been removed) to avoid considerable disruption indoors where first floor floor would have to be lifted to seal unfinished AAC blocks and seal around joist ends.<br /><br />This strategy requires making the crawl space unvented. The plan for this is:<br />- lift floor boards (yes, I know, it will be a pain but there is no way to work from below)<br />- fill bottom of crawl space with hardcore and/or dry render/harling rubble<br />- install DPM and tape to existing DPC in walls<br />- fill remaining space below and between timber joists with wood-fibre insulation<br />- install ProClima SolitexPlus membrane over joists<br />- re-install floor boards.<br /><br />The ground in the crawl space is sealed with tar/bitumen and there is no obvious source of moisture through it.<br />A little moisture comes from the brick footings but these would end up behind the proposed DPM. Not being able to release moisture into the crawl space will likely increase the moisture content of the footings but I don't expect this to be much. Also, they will be slightly warmer than previously due to the EWI that I intend to extend to below ground level (still need to do some THERM modelling to see what effect this will have).<br /><br />Does anyone see a problem with this plan or got any better ideas ?<br /><br /><b >EDIT: See my posts of 11 Aug 2025 below to correct a mistake above. SolitexPlus is the wrong type of membrane here, it should be IntelloPlus. I left the above text as I first wrote it so that the rest of this thread makes sense.</b>]]>
		</description>
	</item>
	<item>
		<title>Solar thermal DIY servicing pressure flushing pump. Choices?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18317</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18317</guid>
		<pubDate>Sun, 06 Jul 2025 10:49:09 +0100</pubDate>
		<author>Justin</author>
		<description>
			<![CDATA[I'm back here after many years, pleased to see the forum still running.<br /><br />My solar thermal limps from year to year, providing an ongoing combination of both spectacular performance and irritating servicing requirements.<br /><br />(Broadly, despite no obvious leaks and no pressure losses, it seems that every year after very hot extreme cloudless days and lengthy stagnation, I get an air lock in the pump (yes, impossible without a leak?? - I'm always flummoxed). This pump is a Wilo solar type, non PWM, which has always been unable to shift it's own airlocks. (The pump station has a manual air trap valve which works but not for gas trapped in the pump). Once this occurs, it always needs a high-pressure service and some playing of the top and bottom service valves and pump power on/off to encourage the bubbles through. That's very annoying, but as it is.- Not my reason to  be here. )<br /><br />My reason here is to see if members have a recommended DIY drill-powered (hence speed controlled) pump, able to reach 2 bar (or close...  1.8 is adequate) and perhaps 20-30 litres/minute. <br /><br />I find them fallible, the last one was a metal bodied Wolfcraft brand one. Like all the others it has a displaced rubber flap wheel internally. Last one got me through 4 years (four services) before packing up. When new it really could achieve almost 2.0 bar and got the fluid gushing round and air cleared very well. Satisfactory, but I now need to buy another and am looking at a dearth of known good alternatives which seem to have the quality or even published spec. Lots of plastic bodied garden-variety (literally) ones, - Ive tried a couple off these before and they didn't perform.<br /><br />The Wolfcraft one I have used has worked, - despite awful online reviews by Others. Perhaps the devil you know.. <br /><br />What servicing DIY pump have people reliably and repeatedly used? I'd sooner not rent in a pumping &quot;service station&quot; due to getting it, the cost, and since my servicing is ad-hoc and seems to be every year. I'd sooner still DIY it. <br /><br />Or perhaps it's time (16 years in) to ditch the solar thermal, servicing and smelly fluid in the loft, and fit a few extra PV panels. It appeals, but I have 2.3KWP under FIT which of course can't be directly added to. I do use a PV diverter also (turned on to assist the solar thermal only during the shoulder months and winter).]]>
		</description>
	</item>
	<item>
		<title>Acceptable level of humidity in crawlspace</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18291</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18291</guid>
		<pubDate>Wed, 30 Apr 2025 18:16:08 +0100</pubDate>
		<author>DannySheffield</author>
		<description>
			<![CDATA[I've had some really helpful advice on insulating the crawlspace, thanks. <br /><br />Stepping back, I realised the relative humidity in there is too high, and that seems to be the first thing to solve. It's 80% today (the ground floor is around 40%, first floor 20-30%). <br /><br />It's a suspended timber floor, and the base of the crawlspace is old concrete (1930s house) - no damp proofing. Two external walls are cavity walls, one is solid brick and stone. There are two good air vents on the back, a good one on the side, a good enough one and a weak one on the front (the higher ground where the Apr brick is squashed up against the joists and at external ground level, so just a single air brick with reduced flow on the inside).<br /><br />The air bricks were improved in February, and a few cubic metres of problematic damp soil two weeks ago <br /><br />I'd appreciate thoughts on 1. the acceptable level of humidity in this context<br />2. Whether I might need to just wait a few months for the work to have it's full effect (and if it's worth trying to speed it up with a fan or dehumidifier)<br />3. Once it's settled to its new normal, how do I work out whether to focus on further ventilation or a VCL layer on the ground as my next step?<br /><br />Thanks]]>
		</description>
	</item>
	<item>
		<title>Closing cavity around underfloor airbricks</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18322</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18322</guid>
		<pubDate>Sat, 26 Jul 2025 19:02:52 +0100</pubDate>
		<author>big_mike</author>
		<description>
			<![CDATA[Hi all,<br /><br />I'm retrofitting a plastic telescopic underfloor vent (periscope type) through a cavity wall with suspended timber floor. The outer leaf has a standard airbrick opening, but the inner leaf (regular blockwork) has a much larger opening, roughly double the airbrick size.<br /><br />The cavity contains what looks like shredded fibre or textile insulation, possibly recycled fabric. A surveyor reckons it was installed in the 1980s or 1990s, judging by the drill pattern in the external brickwork. It’s soft, compacted, and definitely not mineral wool or foam.<br /><br />I'm also installing underfloor insulation beneath the joists, so I’m using the vent duct to drop air below that layer into the floor void.<br /><br />What I need to do:<br />Fit a cavity closer of some sort to seal around the duct and reinstate the cavity detail<br /><br />Avoid disturbing too much of the insulation if possible<br /><br />Maintain air path for ventilation and prevent cold bridging or damp<br /><br />Seal around the duct on the inner face of the blockwork<br /><br />Questions:<br />Best method for fitting a cavity closer in this kind of retrofit situation?<br /><br />Any recommended closers that can be easily notched to fit around the vent duct?<br /><br />Should I trim back or compress the insulation around the opening, or just leave it in place?<br /><br />What's the preferred method for sealing the vent where it passes through the inner blockwork? (e.g. expanding foam, fire-rated mastic, etc.)<br /><br />Do I need to reinstate a DPC layer over or behind the closer?<br /><br />it doesn’t need to look great, just needs to be functional, airtight, and compliant. Any tips, product suggestions, or photos from similar jobs would be much appreciated.<br /><br />Cheers!]]>
		</description>
	</item>
	<item>
		<title>Waterproof plug / socket</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18323</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18323</guid>
		<pubDate>Sun, 27 Jul 2025 13:22:17 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />For the background, I have a 6000 liter rainwater tank with submersible pump to feed a gravity loft tank for toilet flushing.  We also use it for car washing and garden. In the past, I have had to remove the pump for maintenance and one year ago, after 15 years of use, had to replace it.  (bearings totally gone!!!)<br /><br />The electrical connection is via a 13A plug inside the house with the cable running in some underground plastic piping; at the time of installation, the fitted cable was not sufficiently long so added a waterproof joiner  (https://www.tlc-direct.co.uk/Products/BRH65Z.html) pretty much like this but in black    <br /><br />A few days ago, following one month of non-use due to no rain, the tank was full and when turned on, the RCD flicked off.  Few checks later and still flicking off.<br /><br />Have opened the back of the pump and everything is totally dry, all the connectors are tight; cannot see anything wrong.<br /><br />Did a continuity check on the length of the cable on the assumption that perhaps the joiner in the conduit was wet but that passed.  However, decided to replace the entire underground cable with a single length, from the interior 13<br />A to the inspection chamber /access point.  Will leave about 3 m of the original cable on the pump itself as the fittings are better than whatever I would create in replacing.<br /><br />The plan for ease of future removal, have a connection inside the inspection chamber turret so that I can easily disconnect the pump without having the take the back off or pull the entire wiring through the conduit.<br /><br />Which brings me to my question.  It should be waterproof but will hopefully, never get wet.  Easiest would be something like this:    https://www.amazon.co.uk/Masterplug-Rewireable-Waterproof-Outdoor-Inline-Orange/dp/B006X09WDW?th=1<br /><br />Alternative is use the existing connector, or a new replacement, but it does not 'unplug' and needs to be dismantled to separate the two parts.  (see the first tlc link above)   However, the existing was slight 'dirty' and the interior screws and cable ends are blackened, only from oxidation / dirt, not electrical shorting.  <br /><br />Or a similar in-line waterproof plug/socket such as the Wago version:  https://www.tlc-direct.co.uk/Products/WKCJWB.html  which again, does not 'unplug.'<br /><br />Or finally,  this which does seem to tick my 'plug-in' requirement.  https://www.amazon.co.uk/Knightsbridge-Socket-Cable-Connector-3-Pole/dp/B076QH9VF4/ref=sr_1_16?dib=eyJ2IjoiMSJ9.lz4rODU_wJ_wnbDpJ_h4X1sfSKhG8Ly5y8tNXru7fFyoxHtTjF9E31bNMz4x93W5jh7r2-WnnFEIodhwfpbi9P2dFOg2W1NpJRPfNs45iosebjZUv7LPgGnVHXc70jnIVKO7Xrzcfd2GkieAIM5jif3_Mayflc4uzxa2JVogfI0WeoG5xO7yPK-yMxaSV3ShTbUwofwVh9XzABB3ozjp2m8wwzqVUapFOjALMP2dpwqmqCsaqDA1q3UO_NowQmbv6CYL53nJrRlo8Ne6kJr0oKTjC1qe5IC8v_oVPlr0XmA.ARQ0yeTu0PyTKoDVSoHD-pb9ZxLr3nXRzeenbp0pMGE&amp;dib_tag=se&amp;keywords=waterproof+connectors&amp;qid=1753618364&amp;sr=8-16<br /><br />I'm sure any will do the job but would be grateful for your thoughts.  Many thanks<br /><br />Rex]]>
		</description>
	</item>
	<item>
		<title>waste pipe cap?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18321</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18321</guid>
		<pubDate>Sun, 20 Jul 2025 16:42:07 +0100</pubDate>
		<author>djh</author>
		<description>
			<![CDATA[I need to cap a waste pipe, temporarily. We're replacing the flooring in our kitchen and I've disconnected the dishwasher and want to cap the trap so we can still use the sink.<br /><br />Under the sink there's normal 40mm plastic waste fittings and the dishwasher screws onto an 'appliance trap' connection https://mcalpineplumbing.com/traps/domestic-appliance-traps-accessories/sink-trap-with-domestic-appliance-inlet/ I've unscrewed the fitting and removed the whole fitting on the left of the photo. I need a blanking cap that can be screwed on in place of that screw cap but I'm not sure what to buy? I bought a McAlpine T23U Multifit Blanking Plug White 40mm but that seems to be designed to fit onto a plain 40mm pipe, not onto a 40mm pipe with a male threaded end.<br /><br />I'm curious if there's a cap that's designed to screw on in this situation, or do I just need a short length of plain 40mm pipe?]]>
		</description>
	</item>
	<item>
		<title>Cooling</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18313</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18313</guid>
		<pubDate>Fri, 27 Jun 2025 12:12:43 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />SWMBO is quite certain that with climate change, we will b e overheating within the next few years.   She has therefore made the executive decision that we must 'invest' in an air cooler.  As a dutiful husband, I don't get a say in the matter!<br /><br />What is your experience of the various coolers?  Is Dyson worth the extra money in offering more than the others or is one just paying for the designer name?<br /><br />Is there one that is highly recommended?<br /><br />Many thanks<br /><br />Rex]]>
		</description>
	</item>
	<item>
		<title>External destratification pump on CH cylinder</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18272</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18272</guid>
		<pubDate>Sat, 08 Mar 2025 16:44:22 +0000</pubDate>
		<author>owlman</author>
		<description>
			<![CDATA[Has anyone had experience of this type of set up. I was wondering if &quot;churning&quot; the water in order to get a more even store temperature was successful. If so what type of pump was used.]]>
		</description>
	</item>
	<item>
		<title>Foam glass</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18319</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18319</guid>
		<pubDate>Thu, 17 Jul 2025 15:52:48 +0100</pubDate>
		<author>earth bau</author>
		<description>
			<![CDATA[0.3m2 available for anyone who wants it. Otherwise it is going to end up in the skip. West London.]]>
		</description>
	</item>
	<item>
		<title>Retrofit and extension</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18318</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18318</guid>
		<pubDate>Wed, 09 Jul 2025 18:01:11 +0100</pubDate>
		<author>ChrisGT</author>
		<description>
			<![CDATA[Hi glad to see this site is still going! Planning to retrofit a 20 yr old house with external insulation, triple glazing and a heat pump. I had an airtightness test done which came back as around 9 ach which seems to suggest I need to do some serious airtightness work to make this all worthwhile. Its brick and block with a 70mm cavity filled with glassfibre and dot and dab plasterboard. Upstairs the two bedrooms have dormer windows with sloping ceilings from 170 cm above the floor. I was thinking of an airtightness membrane on the outside of the brick joined to the foundation which crosses the wallplate and continues up the inside of the rafters to make a warm roof. I was thinking of externally insulating with a larsen truss  with 40mm woodfibre boards externally and blown in loose woodfibre (gutex)  with XPS EWI below the dpc down to the foundations.  I realise this isnt perfect as theres a leakage path under the slab between the foundation and blocks below ground level but was hoping I could still get a pretty good airtighness result.Would welcome any thoughts on this!]]>
		</description>
	</item>
	<item>
		<title>Optimal EWI Thickness</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18302</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18302</guid>
		<pubDate>Sat, 14 Jun 2025 14:39:23 +0100</pubDate>
		<author>Victorianeco</author>
		<description>
			<![CDATA[Considering we are now looking at embodied energy and lifecycle cost etc. What would be the optimal EWI thickness to aim for in terms of cost/energy/co2?<br /><br />Standard 60s build, no insulation currently in cavity. <br /><br />Windows will be going in (within proposed EWI layer) in the next 2 months, then it will be, CWI (graphite beads).<br /><br />Thinking of EWI using EPS... Limited by space on the side walls of the house so EPS rather than fibre.<br /><br />150mm sound okay?<br /><br />Just then need to consider how to get a good 'stone sill' detail for the windows...]]>
		</description>
	</item>
	<item>
		<title>Oh... GBF is still here? What happened?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18315</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18315</guid>
		<pubDate>Thu, 03 Jul 2025 18:27:19 +0100</pubDate>
		<author>Sprocket</author>
		<description>
			<![CDATA[I have been awol for some years but I see my old account still works! :-)<br /><br />Last I heard GBF was looking likely to close down. What happened?<br />Fortunately I was through the worst of my previous build (roughly 2009-2013) before that happened but I had found the old forum really helpful and I missed it after.<br /><br />Really pleased to have re-found it. I shall lurk a while and see how it looks these days.<br />I am now wondering who of the old-gang are still on here?]]>
		</description>
	</item>
	<item>
		<title>DHW Flow</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18312</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18312</guid>
		<pubDate>Fri, 20 Jun 2025 11:46:37 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />The mains water incoming is of course, 32mm and around 6 bar.  It  goes via a PRV (reduced to 3 bar) to a water softener for both hot and cold.  All the pipework is 22mm, reduced to 15 at the various taps and with the flexible tails and mixer taps, reduced again to around 10mm.<br /><br />Cold water to the baths, showers and utility room is soft; to the kitchen sink and washbasins, it is mains hard (nicer taste!)  Hot water is stored in a 300 litre cylinder and is piped to all outlets in 22mm (then 15 and again, the flexible tails, around 10mm.)<br /><br />From the get-go, when one hw taps is running, a second has reduced pressure, but recently, there seems to have been a very noticeable change.<br /><br />Open any hw tap and the flow is pretty good but within seconds, the pressure ;reduces and the flow is pretty much, a trickle.  So much so that the pressure valve on the shower will not stay on the shower setting.<br /><br />This is a video of what  is happening;  I don't  understand why or how to fix it.  The hw pressure/flow has never been great but it was OK, now it is tending towards unacceptable.<br /><br />Grateful for you thoughts.<br /><br />(PS  I have tried to upload an mp4 video but don't think it is possible.  Is it possible?)]]>
		</description>
	</item>
	<item>
		<title>Salts Testing</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18316</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18316</guid>
		<pubDate>Fri, 04 Jul 2025 13:28:32 +0100</pubDate>
		<author>Victorianeco</author>
		<description>
			<![CDATA[We paid a small fortune for some basic testing for salts and nitrates...<br /><br />We are thinking of making our own cheaper alternative. How can we test for nitrates within floor sample or salts?<br /><br />The Protimeter kit uses 'chloride' tablets but I can't seem to find the makeup of these tablets or how I can make my own?<br /><br />Any ideas for the above please?]]>
		</description>
	</item>
	<item>
		<title>Water</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18310</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18310</guid>
		<pubDate>Wed, 18 Jun 2025 07:50:03 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />There was a big head-line X days / weeks ago, that the gov are going to impose a planning requirement that every new build has solar panels installed.<br /><br />All well and good, and certainly will please the Chinese panel manufacturers.<br /><br />But one of my soap-box topics is that new building regulations should be that every new build has at least 3000 liter (and even considerably larger) rainwater collection to be used for flushing the toilet. It is complete madness that all water supplied to all dwellings is treated to drinking quality, but a large majority is flushed down the toilet.<br /><br />That same collected rainwater can be used to wash the car or water the plants.   Instead, planning application tick the 'environmental' box by installed a couple of water butts at the bottom of a single down-pipe.  We installed a 6000 liter tank and with the dry weather at the moment, it is surprising how quickly it is emptied.]]>
		</description>
	</item>
	<item>
		<title>Too many bolts</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18303</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18303</guid>
		<pubDate>Sat, 14 Jun 2025 21:40:29 +0100</pubDate>
		<author>tony</author>
		<description>
			<![CDATA[https://share.icloud.com/photos/0a0VoDHfDyzthn84VYO6y3FnQ<br /><br />Why so many bolts?]]>
		</description>
	</item>
	<item>
		<title>unexpected MVHR problem</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18311</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18311</guid>
		<pubDate>Wed, 18 Jun 2025 11:07:38 +0100</pubDate>
		<author>Simon Still</author>
		<description>
			<![CDATA[This might explain the strange smell we've been getting in the house sometimes that we couldn't locate]]>
		</description>
	</item>
	<item>
		<title>Biff Vernon</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18309</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18309</guid>
		<pubDate>Tue, 17 Jun 2025 15:49:35 +0100</pubDate>
		<author>RobinB</author>
		<description>
			<![CDATA[I was sorry to find out today the Biff Vernon died in January 2025. I first met him through this group over a decade ago and had the good fortune to stay with him in Louth back then, and had the chance to see his beautiful home and gardens and admire his craftmanship. A great window-maker and artist. I've belatedly read a little more about his work on transition towns and many other projects.  RIP Biff.]]>
		</description>
	</item>
	<item>
		<title>Forum quirks</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18304</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18304</guid>
		<pubDate>Sun, 15 Jun 2025 11:55:05 +0100</pubDate>
		<author>Nick Parsons</author>
		<description>
			<![CDATA[Fostertom mentioned that he's getting 'auto-filled- in the 'whisper' box. I have a message telling me I am not signed in, and yet my details are auto-filled in the 'reply to' box. I don't mind, but I don't think this used to happen. The only difference is that I cannot 'start a new discussion' without signing in.<br /><br />Anyway, more techy people than me (not difficult) say what we need is new or updated software (oh, and more members and contributors, please!)]]>
		</description>
	</item>
	<item>
		<title>Forum Transferring to AECB</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18275</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18275</guid>
		<pubDate>Tue, 18 Mar 2025 18:26:33 +0000</pubDate>
		<author>GBP-Keith</author>
		<description>
			<![CDATA[Hi Folks. I am retiring and handing over the reigns of Green Building and The Green Building Forum to the trusty care of the AECB. As many of you will know Sally Hall and I set up the AECB way back in about 1988 and Sally is still close to the helm of that organisation so what better home for these sites?<br /><br />Thank you all for your support over the years, it is you, the users of the forum that have made this such a special and cherished resource. I wish you all the best for the future, I’ll give some gentle support to the team that are taking over and I’m hopeful that Tony Cowling, (thank you Tony) will stay on as a highly respected volunteer moderator and guru for going forward. <br /><br />I’m sure in the next few days the new admin folk will introduce themselves to you and ask for your wisdom and kindness as they pick up the baton. I’ll be retaining my email address for the next few weeks but I’m certain I will be left in relative peace as you are all so good at what you do best without admin intervention but I feel happy that new blood has come along to bring things up to date with your help. I’ll encourage the new admin to carefully digest your comments on what is needed to go forward.<br />All the best, Keith.]]>
		</description>
	</item>
	<item>
		<title>UK gov - any new &quot;green&quot; schemes or VAT changes since the election?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18198</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18198</guid>
		<pubDate>Sun, 22 Sep 2024 23:58:09 +0100</pubDate>
		<author>stonecold</author>
		<description>
			<![CDATA[I haven't heard of any change yet... how about you?<br /><br />I'm hoping for some kind of improved incentive/funding for heat pumps, or VAT changes for retrofit.<br /><br />Heat recovery, air tightness and the ventilation needed for high levels of insulation all seem to be getting overlooked. Doesn't seem to be any talk of insulation discounts either.]]>
		</description>
	</item>
	<item>
		<title>Ground Source/Air Source for an older house</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16755</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16755</guid>
		<pubDate>Wed, 14 Oct 2020 16:07:16 +0100</pubDate>
		<author>lookseehear</author>
		<description>
			<![CDATA[Hello everyone,<br /><br />First post here - hoping to get some feedback on our thoughts about replacing a &gt;30 year old oil boiler with an ASHP/GSHP in the house we're prospectively buying (a couple of weeks from exchanging).<br /><br />Firstly, a little about us - we're a young family (my wife and I and two children, 3 and 1) and although being cost efficient is important, the most important thing for us is going to be a balance of comfort and convenience. I want to try and avoid the inevitable arguments in the years to come about where to set the thermostat, which has led us to AS/GSHP because we love the idea of keeping the house at a steady temperature year round with constant heat. I've been doing a lot of research on the subject but I'm still struggling a little with viability.<br /><br />We are buying an old house which we believe the oldest part is likely to be 18th century, with 0.5m thick stone wall construction. I understand that stone walls aren't good insulators but are good heat sinks, so the last thing we want to be doing is trying to heat the house up in a hurry. It's a 5 bed detatched, approx. 180 m2. It needs more loft insulation which will be the first job when we move in (sheeps wool looking most likely) up to 300mm. The house is double glazed and although not a hugely drafty house, it's not that airtight either and we're likely to improve the ventilation.<br /><br />Doing some calculations on the heat loss calculator (https://www.resurgence.org/resources/heac.html) seems to indicate that the total heat lost during a typical year might be in the region of 35,000 kWh, and that the peak power output required of a heating system would be c12-14kW. Using the 'rule of thumb' on this resource https://synergyboreholes.co.uk/information/calculations/ seems to indicate that more like 22kW of power output would be required in the coldest periods to maintain 20 degrees in the house. There's a massive discrepancy here and the last thing we want to do is under-spec a system. 12kW looks to be achievable for ground source or for air source.<br /><br />For a ground source system, we'd have to look at either one very deep (~200m) or two shallower (~100m) boreholes (using 35w/m of collector) which would probably be feasible, but more than two boreholes would be difficult from a logistical and cost perspective. We would prefer ground source for potentially higher COP and higher RHI payments to offset the higher cost of installation.<br /><br />For air source, there seems to be a decent amount of choice at the 12kW-14kW including Ecodan which appear to be highly rated and we wouldn't have the same space concerns.<br /><br />The property has solid floors and is slightly split level, but I've assumed we could probably fit wet underfloor heating next year to take advantage of low-temperature heat, but currently the house has decent size (but not 'oversized') radiators in all rooms.<br /><br />All this to say does anyone have experience with ground source or air source for a similar property? Can anyone offer insight on whether 12-14kW is likely to be sufficient, paired initially with radiators then subsequently with underfloor heating?<br /><br />Thanks in advance for reading this.]]>
		</description>
	</item>
	<item>
		<title>Lawn / Grass</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18305</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18305</guid>
		<pubDate>Sun, 15 Jun 2025 14:19:22 +0100</pubDate>
		<author>Victorianeco</author>
		<description>
			<![CDATA[We have around 80m2 of lawn/grass in our front and rear garden.<br /><br />We're not too bothered about having a 'perfect lawn', but we don't want the wide spreading weeds.<br /><br />We have buttercups, clover and some other 'flowers' that pop up but we'd like to get the grass a bit more robust/hardy.<br /><br />Any tips on what we should be doing? We would like to keep the grass clipped shortish for the kids to run about on so we don't want an overgrown meadow type lawn.<br /><br />Ideas appreciated<br /><br />Thanks]]>
		</description>
	</item>
	<item>
		<title>Installing your own windows - Did/you would you?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14098</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14098</guid>
		<pubDate>Mon, 07 Mar 2016 14:38:09 +0000</pubDate>
		<author>JSC</author>
		<description>
			<![CDATA[I am just getting quotes together for new windows, and just wondered if/why people choose to have their windows fitted, or fitted their windows themselves.<br /><br />I did not think that this part of the build would be so fiddly, especially when there seem to be mfrs that give you 1yr warranty, but 10 years if fitted by them (for Â£200/window, of course!).<br /><br />N.B I am looking at timber casement, so pretty simple, operationally/structurally.]]>
		</description>
	</item>
	<item>
		<title>DPC repair tape?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18300</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18300</guid>
		<pubDate>Sat, 07 Jun 2025 14:48:33 +0100</pubDate>
		<author>Dominic Cooney</author>
		<description>
			<![CDATA[What tape do folks recommend to repair DPC sheet?<br />It’s a long story but after a power floated concrete slab fail (our friend assured us that he knew what he was doing)<br />And several weeks with diamond concrete grinding equipment <br />There is damage in a few places around the edges.<br />It’s unlikely to ever actually get wet because it’s all on top of EPS <br />It’s acting as more of an airtightness layer, so it would be a good idea to fix before progressing on to the internal timber frame.<br />Any suggestions welcome!<br />Thanks]]>
		</description>
	</item>
	<item>
		<title>Smoke alarm, strange behaviour</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18299</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18299</guid>
		<pubDate>Thu, 05 Jun 2025 18:15:36 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />Although I have mains connected smoke / heat alarms fitted to the house, I decided to install a regular, battery operate one at a second high point; it is effective in the dressing room' with access to the bathroom, but is above a void to the f/f space below.<br /><br />It has been there for over ten years, regularly tested and the battery replaced.<br /><br />Last night, after having had a bath and five minutes in bed, the alarm activated for no reason.  I replaced the battery this morning and again, just now, following my wife washing her hair, it has again, activated.  the copy on the rear does state humidity of above 93% but that is certainly not the case.<br /><br />What would be causing it to activate?  Does it mean a replacement?<br /><br />Thanks and toodle pip]]>
		</description>
	</item>
	<item>
		<title>Suspended floor void question</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18301</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18301</guid>
		<pubDate>Sun, 08 Jun 2025 11:14:39 +0100</pubDate>
		<author>mitchino</author>
		<description>
			<![CDATA[I am insulating under a floor. The base of the void was originally sealed with a thin layer of tar when the house was built, but this has broken up during refurbishment so it's now basically dry earth and fine rubble.<br /><br />The floor will be insulated with rock wool suspended on weed fabric, air tight barrier on top &amp; floorboards.<br /><br />The void is ventilated. I'm thinking there's no need to reseal it?]]>
		</description>
	</item>
	<item>
		<title>Building in Japan 1</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18298</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18298</guid>
		<pubDate>Wed, 28 May 2025 10:10:15 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />Have recently returned from a regular visit to Japan.  While wandering around residential areas, I am always amazed at the quality of  construction.  Virtually all houses are timber frame, mainly of course, because bricks and earthquakes are not a happy mix!<br /><br />When I had my house built, the poured foundations, most likely, tick the  structure box, but they did look rough around the edges.  In Japan, the foundations have virtually polished shuttering and the result, even though it is never seen, is flat and perfect.    Quite amazing to see; and I can only assume that the rest of the construction follows a similar high standard.<br /><br />All the timber is amazing; most is machined off-site but all fits  together perfectly.  None of the 'butt-joint and nail' that we get in the UK; everything is property jointed.  The sole plates have  pre-drilled holes that align with the foundation installed bolts.  <br /><br />Looking at any site seems that the builders actually care about what they are doing.  Everything is clean and tidy with no excessive mess left laying around.<br /><br />It is amazing.]]>
		</description>
	</item>
	<item>
		<title>EuroLock</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18294</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18294</guid>
		<pubDate>Sun, 11 May 2025 12:09:24 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and ll,<br /><br />Trying to help an elder neighbour who has a non-working Eurolock.<br /><br />The lock is probably a 30/30, set into an aluminium sliding patio door; unfortunately the door is locked and the two keys has has will not turn.  I assume the cam on the lock actives a lever that locks/unlock the lever that engages with the frame.<br /><br />I have watched a number of videos on removing a Eurolock by breaking it, but all the vids  are for a door that has a bezel  around the handle so there is plenty of lock to grip.  In this case, the lock protrudes either side of the ali frame by only around 5 mm, so nothing to grip.<br /><br />The other option is to drill it out, but where does one drill?  Into the key slot or below, into the pins?  Then what, since I would need access to the cam to swing it into the open position.<br /><br />Grateful for any thoughts.<br /><br />Thanks and toodle pip]]>
		</description>
	</item>
	<item>
		<title>Govee temp RH units</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18282</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18282</guid>
		<pubDate>Mon, 07 Apr 2025 09:37:04 +0100</pubDate>
		<author>revor</author>
		<description>
			<![CDATA[Recently got three of these units to monitor temperature in my poly tunnel. The spec is just what I need. Having great difficulty in setting them up, intermittent results trying to connect to my wifi. Think mostly due to lack of a proper user manual/instructions. Managed to get 2 set up but can only access the data when I am in site of the wifi access point they are connected to. I have the router in the house and 3 external wifi access points connected to it. These were set up when I installed 4 TP link Tapo cameras and wherever I am I can access any of the cameras without being, near any of the wifi points. What is on the Govee website is less than useful. Anyone got any experience of these units and know where there is a decent information to be found?]]>
		</description>
	</item>
	<item>
		<title>Access</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18297</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18297</guid>
		<pubDate>Sun, 25 May 2025 10:16:59 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />When designing a house, roof lights seem like a good idea.  X year down the line, they do let in the light, but cleaning and any maintenance are a major issue.<br /><br />Have some roof lights on the front and the back; of course they are over a void making access challenging.  The front one, I can get to with a ladder on the interior balcony, but the rear,(as in the photo) not so easy.<br /><br />Have an annoying small leak that I believe is due to the construction of the window and how it is attached to the frame.  Have a similar issue with one at the front, and have more or less resolved it.  Guessing the same with the rear.<br /><br />SWMBO says to get a roofing guy in but he will not repair anything as the issue is not the roof.  Additionally, I don't trust them to do want I want and I'm sure they will find something much bigger (that does not exist) to repair. When last asking for a quote to do some basic cleaning, they all wanted scaffolding, which was going to cost more than the job I wanted doing.<br /><br />So my question is, what is the best way to get access to this window?  My guess is a tower, and a neighbour would loan me his, but that only has a working height of around 2.5m.<br /><br />Any suggestions would be appreciated.]]>
		</description>
	</item>
	<item>
		<title>HELP NEEDED - Backboiler to Thermal store</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18296</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18296</guid>
		<pubDate>Tue, 20 May 2025 12:32:09 +0100</pubDate>
		<author>Jacket84</author>
		<description>
			<![CDATA[Hi All,<br /><br />My first post so please bear with me . I joined the forum as looks like a lot of knowledge here with regard to these types of systems. Therefore hoping someone might be able to assist with the problem described below that I’m experiencing with my biomass heating system. To say I’m beyond desperate to get this fixed is probably an understatement. <br /><br />In summary, I had the system installed 2 years ago and it’s never worked properly. I have a 2200 litre Akvaterm thermal store which has the following circuits i.e. flow and return:  <br /><br />1. For the biomass cooker in my kitchen which has a 22kW back boiler (at about 80% efficiency so say 17kW)  the towel radiators in our ensuite bathroom, main family bathroom and spare bedroom ensuite are also on this circuit. <br />2. Central heating i.e. all other radiators in the house<br />3. Domestic hot water<br />4. For the oil boiler which I kept for redundancy / convenience <br /><br />The problem I'm experiencing in the winter months (i.e when I want to use it!) is that as the temperature of the store itself gets hotter, the water in the boiler of the biomass cooker itself  (32 litre volume) seems more and more prone to overheating and as a result the safety valve built in to the cooker (PRV?) is coming on and dumping the water out. The end result is that we can’t use the cooker to heat the store or we can but the fire is so small it can’t produce any meaningful heat to raise the overall temp in the store. I’m probably not describing this very well but it is like the water in the boiler of the cooker isn’t getting moved quick enough and sort of sits in the cooker.  <br /><br />Thankfully I got the installer to do a drawing of the system for me. See image below.<br /><br /><br /><br />I’ve tried to rack my brains as to what is causing this. The system is pressurised so I wondered if it was possibly the issue with the pump on the cooker return (above garage Black one as described on drawing above) either not being near enough to the cooker which is in the kitchen. Or an additional pump on the cookers flow near to the cooker itself is needed to more effectively pump the now heated water in the cooker’s boiler away quicker?  My other thought was is there  an issue with flow rate but the circuit from cooker to store/accumulator was put in at the same time as the store  and pipe work all looks to be same size however the cooker circuit also has our towel radiators in the rooms as per point 1 above so I wondered if the smaller dimension pipework on these could be causing the problem?<br /><br />Any help would be really, really appreciated.<br /><br />P.S. The store was actually sized with the idea of a second 40kW batch boiler being added, hence why it is so big.]]>
		</description>
	</item>
	<item>
		<title>High-ish performance bifold (Windows) with ventilation</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18284</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18284</guid>
		<pubDate>Mon, 14 Apr 2025 16:13:57 +0100</pubDate>
		<author>Rigmarole</author>
		<description>
			<![CDATA[Hello all,<br /><br />I'm on the hunt for some high-performance bifold windows for our build. I'm particularly interested in options that offer secure ventilation for cross-ventilation, like a tilt-turn section, top-hung section, or any other innovative solution that allows for ventilation without fully opening the windows.<br /><br />This window is for a dormer in a warm roof. The build is mostly completed but still in progress, featuring 200mm of external insulation (including dormers) and 150mm of internal Rockwool, achieving a a U-value of around 0.096 W/(m²K). I'm aiming for high-performance windows, but I'm open to some compromise for added functionality.<br /><br />I've been meaning to share the progress of our build here, as I've used a lot of ideas and solutions from the greenbuildingforum (and come up with some of my own, for better or worse), and I will do so once time allows! This forum has been a valuable resource.<br /><br />Here's what I've looked into so far regarding window manufacturers:<br /><br />Solarlux Highline: They seem quite pricey and haven’t been provided with any drawings despite a lot of time passing, but they assure me they can configure a tilt-turn on one side of the bifold setup. Contact has unfortunately gone quiet after I questioned their “time limited price” option (didn’t want the added pressure). U-value &gt; 0.8 W/(m²K).<br /><br />Alumil Smartia MF65: They say they can do a similar setup to Solarlux, but unfortunately, communication with their reseller has been an issue following the first quote, despite being initially very helpful. U-value = 1.1 W/(m²K).<br /><br />Lacuna: I've just recently been in (indirect) contact with them after feeling like I’ve exhausted the above options. They seem to offer this solution—see this promising video: Lacuna Video &gt;&gt;&gt; https://youtu.be/NX1yDLQYQgo?si=5tUMo1wrid9BDKtl&amp;t=34<br /><br />U-values seem to range from of 0.6 W/(m²K) to 0.85 W/(m²K), but not sure where suggestion will fall.<br /><br />Sunflex: Their SF75 Triple Glazed 3+1 can be vented, which is great, but the venting is achieved by &quot;shunting&quot; the windows out slightly. Good, but I would have preferred a tilt-turn section for maximum ventilation when needed. U-value = 0.8 W/(m²K).<br /><br />If anyone has any more suggestions to explore, that’d be great. Architecturally, the view from the dormer window is very much a &quot;picture window,&quot; so a bifold feels like the best way to achieve the best blend of inside/outside experience…but they’re proving difficult!<br /><br />Thank you!]]>
		</description>
	</item>
	<item>
		<title>Feedback on using lime/cork for limecrete slab</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18295</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18295</guid>
		<pubDate>Tue, 13 May 2025 15:13:25 +0100</pubDate>
		<author>enkidu</author>
		<description>
			<![CDATA[Hi all! I am renovating a stone barn and have removed the previous stone floor to install a limecrete slab above RFG with underfloor heating integrated in the slab. I was suggested to use lime with cork aggregate as per a St Astier product sheet (https://www.saint-astier.com/produits/beton-de-chaux-liege/) but was looking for some feedback from those with more experience on this idea. First, does it make sense to reduce thermal mass when I'm actually looking for that with UFH? The cork would help with thermal isolation from the ground but presumably store less heat. Second the StA sheet only mentions using cork aggregate 3-15mm and no sand/fines. Not sure if that makes sense from a durability perspective? I got in touch with mike wye to ask if they had thoughts but they had not heard of this lime/cork mix.  <br /><br />Thanks!]]>
		</description>
	</item>
	<item>
		<title>PIV in a warm loft?</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18292</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18292</guid>
		<pubDate>Thu, 01 May 2025 23:48:06 +0100</pubDate>
		<author>Mr_W</author>
		<description>
			<![CDATA[Hello,<br />Wish I'd found this website many years ago when we renovated our house. Better late than never!<br />During the winter we get quite a bit of condensation on our windows, which leads to black mould. I'm looking for solutions.<br />The house was renovated a few years ago with energy efficiency a major consideration. Prior to the refurb, the house was heated via an LPG boiler + electric heaters, which costs us £1000s / yr and was still cold. The renovation included interior wall insulation (12+38 mm PIR backed plasterboards), double glazing, rockwool battons insulation between floor joists on 1st floor and loft, a new and insulated roof (100 mm PIR between joists + 25 mm PIR below joists). Heating is supplied by an air source heat pump with UFH throughout. Plus PVs on the roof.<br />We have standard extractors in the bathrooms linked to the light switches and also in the kitchen for cooking. The windows are wooden (acoya) and traditional looking 'cottage style' casement with bars. They do not have trickle vents. The house is over 100 years old and the exterior walls are two skins of bricks without any cavity.<br /><br />To solve the condensation and mould on the windows I'm thinking of either retro fitting trickle vents (not ideal due to cost, aesethics, and drafts), or Positive Input Ventilation. The PIV could be installed into the warm loft, which although is well insulated is not sealed from drafts.<br />However, all the info refers to installing PIV into a standard cold loft and I can't find any info on installing in a warm loft. I assume its fine to do this, but thought i'd ask on these forums to see what the experts on here think.<br />Any other suggestions to solve the condensation issue.]]>
		</description>
	</item>
	<item>
		<title>Removing overgrown hedgerow in a garden</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18161</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18161</guid>
		<pubDate>Sun, 14 Jul 2024 08:37:05 +0100</pubDate>
		<author>Victorianeco</author>
		<description>
			<![CDATA[Looking to tackle this overgrown hedgerow: https://drive.google.com/file/d/1vw4_OA6jcoFKIn08E6apKaNtEqZUPE0j/view?usp=drivesdk<br /><br />It appears to be a mix of intertwined plants: <br /><br />Holly<br />Ivy<br />cotoneaster salicifolius<br />Brambles<br />Rose<br />Amongst others<br /><br />Now I appreciate the wildlife factor, but we want to level it and grow plants of our own choice; cherry laurel or similar. <br /><br />It's simply overgrown and blocking sunlight. <br /><br />Any tips for removing it all? Some of the trunks are at least 4&quot; thick in areas<br /><br />All material will be shredded and composted for use in the garden]]>
		</description>
	</item>
	<item>
		<title>Slab with ASHP and overnight rate</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18266</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18266</guid>
		<pubDate>Tue, 25 Feb 2025 10:55:47 +0000</pubDate>
		<author>neelpeel</author>
		<description>
			<![CDATA[I've always thought a large 'interseasonal store' type slab and PV was the ideal way to go for a new build / extension. But...<br />- We now have tariffs with very low overnight rates (or low periods for ASHP tariffs).  These rates are much lower than you can get for PV export so if you have a battery you are actually better off exporting all of your solar.<br />- Heat pumps can give you a CoP of 4+.<br /><br />So I think the killer combo is now probably a smaller slab with UFH that is getting charged up during the Autumn overnight with an ASHP (and then topped up as required through Winter/Spring)<br /><br />In the warmer months the CoP will be highest so you could be looking at 4.5X efficiency at least.  At £0.07/kWh (IOG overnight rate for example) this would equate to only 1.5p per kWh to charge the slab.  IOG tariff gives 6hrs cheap rate each night so in theory you could be putting in 6x7kW = 42kWh each night.<br /><br />Is anyone doing this yet??]]>
		</description>
	</item>
	<item>
		<title>Kitchen cabinet light</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18286</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18286</guid>
		<pubDate>Tue, 15 Apr 2025 10:53:11 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all,<br /><br />When we built the house 15 years ago, all kitchen bits and bobs where from Ikea.  Including the under cabinet lights, which are mini-flourescent strip lights.  All had been OK until a few years ago, when one decided not to function.  I bought a pair of replacement tubes (good to have a spare!!) only to find the replacement the faulty one, did nothing at all.<br /><br />Before replacing everything with LED, which would be quite a job as the wiring is somewhat recessed behind cabinets, I had a look at the circuit board for an obvious fault.  Everything looks fine but decided for the sake of one of Chinese finest, to replace the capacitor (the photo is the original, which I feel is OK, but...)<br /><br />The replacement worked and the light now comes on, but.....  Within about 5-10 mins, it goes out again and while the unit is still warm, will not restart (power off then on again.)  When cold, it does start for the 5-10 mins.<br /><br />Not being an electronic expert, what could be the fault that causes it to fail.  A bad solder joint?  Something else like another capacitor that when full, does whatever?<br /><br />The other three units in the chain have never had any problem.<br /><br />Thanks.]]>
		</description>
	</item>
	<item>
		<title>No excuse for woodburning</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18287</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18287</guid>
		<pubDate>Fri, 18 Apr 2025 09:01:11 +0100</pubDate>
		<author>fostertom</author>
		<description>
			<![CDATA[Re-opening an old topic on GBF, looks like undeniable facts at last - woodburning (as well as burning anything at all to keep warm and washed) should be a no-no, and can only be considered practically harmless as a tiny proportion of users, and only in open countryside, and only by burning  harvested-by-hand/electric chainsaw local hedges and fallers (i.e. no diesel, no chawing up the forest floor).<br /><br />https://www.theguardian.com/environment/2025/apr/18/map-residential-wood-burning-england-wales<br />https://storymaps.arcgis.com/stories/9231a18627b94b3a80e4f33fb3b4a9fd<br /><br />Could spend a week mastering the various interesting ways the data is presented. Some here on GBF no doubt will - their usually insightful analysis is awaited.]]>
		</description>
	</item>
	<item>
		<title>Ripple Energy go bust</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18293</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18293</guid>
		<pubDate>Thu, 08 May 2025 10:06:17 +0100</pubDate>
		<author>Simon Still</author>
		<description>
			<![CDATA[https://www.thenews.coop/ripple-energy-which-worked-with-community-sector-goes-into-administration/<br /><br />This is a shame.  Their model seemed good - rather than having your own small/inefficient local generation, invest in a share of a wind/solar facility owned by a coop and get a credit against your utility bill.  <br /><br />Existing coops look like they'll be fine but the one that they were currently raising money for (which I'd bought into) is in limbo.  They'd not agreed the site purchase (it was bought by someone else) and the funds people had paid to join (which surely should have been in a ring fenced account) remain unaccounted for (no information to the people who'd applied, no information to the coop board). <br /><br />A small (and stated) amount of the 'purchase' was to cover Ripple expenses of setting up the scheme and managing the build, but the majority was for a share of ownership of the wind farm.  That should have been returned when the purchase fell through.]]>
		</description>
	</item>
	<item>
		<title>Avoiding damp risk while insulating suspended timber floor</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18288</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18288</guid>
		<pubDate>Sat, 26 Apr 2025 20:19:34 +0100</pubDate>
		<author>DannySheffield</author>
		<description>
			<![CDATA[I've been reading other post on this but still can't figure out the best way for my house. I have a 1930s semi with suspended timber floor, with enough space in the crawlspace to insulate from below (and I want to avoid damaging the floorboards which I plan to expose soon). The floors get cold and I want remove the carpets, so I need to insulate it somehow. I react very badly to mould, so while I want to improve insulation, my main priority while doing it is avoiding damp risk. <br /><br />We had rockwool and netting fitted under an ECO scheme, but it got damp in multiple areas and was making timbers damp. Two different damp specialists said I should remove it, so I did. I have since cleaned out the wall cavities and improved ventilation in there. Both specialists recommended PIR board rather than rockwool, but it seems to me that the best way to avoid mould risk would be to keep it breathable e.g. with mineral wool and a breathable membrane? But I'm unsure as that is pretty close to what I ripped out last year!<br /><br />Any advice/experience on a method that has the lowest risk for damp and mould, and is manageable to do well  for a moderately skilled DIYer would be welcome.]]>
		</description>
	</item>
	<item>
		<title>Voltage Optimisers</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18290</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18290</guid>
		<pubDate>Sun, 27 Apr 2025 20:33:19 +0100</pubDate>
		<author>owlman</author>
		<description>
			<![CDATA[Does anyone have or had experience of Voltage optimisers, the ones that fit between the meter and the CU.<br />This type of thing, there are others:-<br /><br />https://egesolutionsltd.co.uk/eco-max/]]>
		</description>
	</item>
	<item>
		<title>Loo seats</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18289</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18289</guid>
		<pubDate>Sat, 26 Apr 2025 20:43:46 +0100</pubDate>
		<author>djh</author>
		<description>
			<![CDATA[We have two identical loos in our house (plus a third that's different). They are branded Vitra and I'm not sure what model they are. I think it may be a 'Zentrum', which they no longer make apparently although it's similar but not the same as an S50 - floor-standing back-to-wall. The Zentrum is a bit smaller I think - the seat is still available and matches ours. 440 mm x 360 mm with rolled edges on the lid. https://www.vitra.co.uk/bathroom-sanitaryware/wcs/wc-seats/zentrum-wc-seat-sku-94-003-009/<br /><br />Anyway, one of them gets used a lot and the other much less. About five years ago, when they were five years old, the soft close mechanism on the lid failed, and it's surprisingly annoying having to relearn the art of closing a loo seat softly! I thought at the time their prices for a replacement were a bit steep, so I bought a cheap soft-close replacement somewhere and that fitted remarkably well but feels a bit flexible and 'cheap'. I put that on the little-used loo and moved its original seat to the more heavily-used one.<br /><br />So another five years has passed and it feels like the soft close on the second Vitra seat is beginning to fail. The price has gone up even more, and I now have evidence that a new one would only last five years, so I'm reluctant to buy another from Vitra. But I would like a better quality then the previous replacement I bought (and I can't remember where I got it :cry: ).<br /><br />So does anybody have any idea how or where to buy good loo seats to fit my loo?]]>
		</description>
	</item>
	<item>
		<title>MVHR commissioned: master bedroom too cold - supply valve causing a draught towards the bed</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18283</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18283</guid>
		<pubDate>Mon, 07 Apr 2025 13:27:47 +0100</pubDate>
		<author>stonecold</author>
		<description>
			<![CDATA[Well the Zehneder ComfoQ is all fitted and commissioned and has been running 3 months now, and unfortunately my initial concerns about having the master bedroom too cold and too draughty remain - it was warmer and more comfortable before so clearly not getting the full benefits here. <br /><br />I'm generally sensitive to slight draughts (including warm ones) and feel really cold ???  compared to the average human so my people aren't going to notice it at all (spouse definitely doesn't). I wear a sweater or hoodie most of summer.<br /><br />The master bedroom supply valve *feels* like it shoots air diagonally down towards the bed instead of (or as well as) across the ceiling. My arms need to be fully tucked up under blankets and duvet all night when they didn't before, which is a nuisance when you are trying to hold a book and it's no different now the weather is a bit warmer outside. I also notice the draught direction on walking into the room.<br /><br />The supply air valve air temperature feels too low - but this might not so matter if it wasn't pointed at me.<br /><br />The lounge at times also has the same thing happening towards the sofa although the temperature is OK and it's only noticeable some of the time.<br /><br />Everything was well fitted and insulated and avoided the typical mistakes of trying to put the MVHR in the loft (it's downstairs and attic ducting is well insulated). It's a Zehneder so very efficient and nice and quiet, loft above is well insulated and there's EWI but no solar gain in bedroom or lounge and it's an old house. The airtight vapour membrane on the loft floor got taken out pre-MVHR (condensation was running down the walls because windows don't have air vents), and looking at the ducting up there I can't see how we can really get another put down. The supply valves have been carefully planned for addressing the areas we had conversation/ventilation issues ("dead space") while being far enough away from bed and sofa.<br /><br />Solutions I can see now are:<br />1. Set MVHR temperature profile to warm, which I did this morning but won't fix the draught sensation <br /><br />2. directional supply valves to avoid blowing air right at me (it would need to be adjustable so that air can still get to the corner of the room but maybe 30-40 degrees of the 360 degrees blocked from the outlet of the supply valve<br /><br />3. adjusting the flow rate to lower it, which to keep things balanced means either increasing it in other bedrooms or reducing the extract rate in bathroom and kitchen (which I'm reluctant to do) . <br />This might not be ideal since both the problem rooms have only 1 supply valve and are the largest rooms, and that's the only downstairs supply valve (other beds are not currently used but also don't have the draught effect). <br /><br />The master bed also has a raised ceiling so a large volume of fresh air is needed. Passivehaus good practice guide recommends  starting at 30 m³/h for double rooms. I think I need to dig out my commissioning details for current settings.]]>
		</description>
	</item>
	<item>
		<title>Smart meters and British Gas</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18265</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18265</guid>
		<pubDate>Mon, 24 Feb 2025 21:31:13 +0000</pubDate>
		<author>Artiglio</author>
		<description>
			<![CDATA[Evening all<br /><br />Having been inundated over the years about he wonders of smart meters by the gov/press/suppliers, I was amazed to learn that British gas only store readings on a monthly basis to suit the billing date or when the name on account changes.<br />I’m a landlord and a tenant moved out , but gave incorrect dates to british gas who then charged me for the wrong period, in preparing the bill they had collected a reading based on the date the leaving tenant gave, but then had to estimate useage for the new energy costs on January the 1st, quite why they can’t collect a meter reading on what is a known date is beyond me. Applied to both gas and electric.<br /><br />Similarly , the water company sent me a bill titled “your metred assessed bill” for a property with no meter.<br /><br />How much do these companies make from people who trust them and pay the bills without checking? ( on the assumption that such practices wouldn’t exist if it meant they lost money)]]>
		</description>
	</item>
	<item>
		<title>Sticking Windows</title>
		<link>https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18285</link>
		<guid isPermaLink="false">https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18285</guid>
		<pubDate>Tue, 15 Apr 2025 08:18:52 +0100</pubDate>
		<author>Rex</author>
		<description>
			<![CDATA[What ho one and all, <br /><br />Wanted sliding windows as access to two balconies and decided to go with the 'van' style pop-out, flush fitting that the manufacturer of all the windows provided.  They have a tilt for ventilation function, or pull inwards to van-style, slide.<br /><br />Although the inner frame is wood, the outer is aluminium.  It has a flat area to meet the rubber seal on the window.<br /><br />Obviously, during the winter months, the windows are closed and when the time comes to open, it is virtually impossible.<br /><br />I have found that the rubber seal where compressed against the flat ali, kinda bio-degrades and sticks itself to the ali.  The ali part is factory gloss but with 15 years of degrading  rubber,  now has a rough texture, that does clean off with some elbow grease.  The rubber itself is still in good condition, not falling apart nor sticky, but that contact area, is pitted.<br /><br />Unfortunately, the company is now out of business, so buying a replacement seal is not possible.  <br /><br />I am wondering  what I can apply to the rubber to prevent this sticking?  A smear of silicone grease seems like an idea but ...................?<br /><br />The yellow arrow show the residue on the ali frame, the red arrow shows the rubber seal itself.<br /><br />Any though would be appreciated.<br /><br />Thanks]]>
		</description>
	</item>
	
		</channel>
	</rss>