Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

PLEASE NOTE: A download link for Volume 1 will be sent to you by email and Volume 2 will be sent to you by post as a book.

Buy individually or both books together. Delivery is free!


powered by Surfing Waves




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    • CommentAuthorbiffvernon
    • CommentTimeMar 21st 2007 edited
     
    OK, who saw Kevin fingering the shiny stuff on Grand Designs and saying that just this thickness gives as much insulation as, oooh, that much ordinary stuff? :bigsmile:

    Continues from the old forum topic on Multifoil Insulation:

    Start of thread:
    http://www.greenbuildingforum.co.uk/forum/index2.php?DATEIN=tpc_wlpssdlpg_1142805843

    End of thread:
    http://www.greenbuildingforum.co.uk/forum/index2.php?DATEIN=tpc_wlpssdlpg_1142805843&LP=true
    •  
      CommentAuthorSpike
    • CommentTimeMar 21st 2007
     
    The Grand Designs world is a magical place where work can be done at a fraction of real world prices (a castle renovation for £700K - including the purchase cost ?????). I have no doubt that the laws of physics work just as differently as the laws of building economics in this place.
    • CommentAuthorRosemary
    • CommentTimeMar 21st 2007
     
    A lot of viewers, presumably, who will all be wondering why anyone bothers with the ordinary stuff. And the plug for the shiny stuff was the only brief nod in the direction of insulation or energy efficiency in the entire programme. I wonder what sort of energy performance certificate that place will get?
    •  
      CommentAuthorecoworrier
    • CommentTimeMar 21st 2007 edited
     
    :bigsmile: I saw that and thought of you all.

    So all we need to do is build castles in the sky,
    to solve our housing problems.:surprised:
  1.  
    I thought it odd that they were being allowed to build a luxury penthouse on top of what appeared to be an old people's home... I think the pensioners should have wrapped the German woman in some of the multifoil and bundled her into the water tank shed... then they might have finished on time and got a bit of peace and QUIET!
    • CommentAuthorSaint
    • CommentTimeMar 24th 2007
     
    Biff,
    It seems only fitting that having opened and closed the enormous string of postings on this subject in the old forum that you should start a hopefully more conclusive string on the new one...
    I must confess that having ploughed my way through many of the expansive and to me increasingly incomprehensible although I'm sure very worthy technical postings from Funcrusher, Fostertom, Martian and Mike George I went off the boil a bit.
    However on Friday I attended the Homebuilding and Renovating show at the NEC. A good show, many interesting materials, a few disinterested sales guys, some beautiful wood products and a remarkable number of UFH stands. I plotted my course deliberately to avoid going anywhere near the shiny stuff stand and so keep offthe boil and so after a visit of 5 hours plus felt satisfied with what I'd seen but feeling rather knackered headed for the exit.
    Then it happened, temporarily off guard, I walked straight into the other shiny stuff stand that's the "by 'eck" rather than the "Mon Dieu" variety. It was fairly busy so I stood fiddling with an installed demo section of said material. A few feet away from me an older couple were receiving a sales pitch. I was interested to overhear that apparently now the 25mm M/F is equivalent not to 200mm of mineral wool but 270mm. Better than that and in a movement not dissimilar to that of cabin crew indicating the emergency exits the sales person pirouetted around and gestured to a 140mm foil faced slab of PUR on another section of the roof and said that the 25mm M/F was also equivalent to that. Then the other thing happened, there was an audibly loud crack and the sales guy jumped backwards as did I fearing the thunderbolt that must inevitably soon accompany this divine intervention. However it turned out to be nothing more than static and I figured rather than entering into a long dialogue it was a case of "'nuff said" and headed on out
    •  
      CommentAuthorKeith Hall
    • CommentTimeMar 26th 2007 edited
     
    Interestingly, Tri-Iso 10 insulation (probably the most common of the foil insulants) has been tested against a range of other insulants recently by the 'Sustainability Institute' in Ireland and the results have been published in a new Irish green building magazine called Sustainability (Vol1, Spring 2007).

    In a nutshell, the multifoil insulation was pitted against four other insulation types at appropriate thicknesses; Holzflex flax board; sheepswool; Kingspan rigid urethane foam and Rockwool mineral fibre in a standardised hotbox test.

    The results seem to confirm what many have believed for some time now. The author, Andy Wilson states in the article "On average, 75% more electricity was required to heat the Tri-Iso Super 10 box than the Rockwool box. The relative performance of the two products varied quite a bit according to the prevailing weather conditions outside. During very cold or windy weather, the Super 10 particularly poorly."

    Another interesting conclusion from the test was that "both of the natural insulations tested out-performed the Rockwool."

    The article, does refer to previous small scale tests that users of this forum have carried out and also points to a BRE study from July 2005.

    I don't think the story is on their website but the publishers website address is http://www.sustainability.ie where I'm sure you can order a copy of the mag.
    • CommentAuthorGuest
    • CommentTimeMar 30th 2007
     
    From George,

    MULTIFOILS versus TRADITIONAL Insulation

    Realize yourself an experimentation to get a real and reliable answer to question of the efficiency of multifoils.

    Get the description of this very simple experimentation simulating the conditions encountered under a roof warmed by the sun at http://perso.orange.fr/sudoku.laviron/isolantEnglish

    You will be able to compare, yourself, multifoils with classical insulators. You will also understand how, in some countries, some manufacturers indicates that multifoils are equivalent to X centimeters of classical insulators by using experiment which have no relationship with the real conditions encoutered in a house...

    No need to argue and/or to develop endless theory or questions. There are a lot of other (very good) experiments made by official organisms or by individuals ; the advantage of this one is that you do it YOUSELF.

    Have a good experience at http://perso.orange.fr/sudoku.laviron/isolantEnglish
  2.  
    • CommentAuthorGuest
    • CommentTimeApr 18th 2007
     
    Hi all,

    Great couple of debates going there regarding the mutlfoil insulation, and some superb contributions... although i must admit, after having spent a number of hours on the last thread i skipped, oh about 100 pages and went straight to the end.

    Im currently doing a MSc in Environmental and Energy Studies, and am considering doing a thesis based around multifoil insulation. I'm looking at a number of angles, one of them being some Life Cycle Assessments on the material. Do any of you guys, (Biff, Keith etc) who have been knocking around this thread for the past while, know of anyone who has taken on such a job? As far as I know the BRE havent, and as yet i havent approached any of the manufacturers. Anyone have any thoughts on whether they'll be receptive to this, and provide me with any manufacturing information they may (or may not) have.

    Would also appreciate any thoughts you all may have.

    Simon.
    • CommentAuthorMike George
    • CommentTimeApr 18th 2007 edited
     
    Hi Simon, To my knowledge, what you are proposing has not been done and I have been trying to get information from multifoil manufacturers for some time.

    At one time Tony Reed from YBS expressed some interest in LCA of multifoil, I don't know if he has proceeded but it may be worth contacting him.

    I have also approached other manufacturers but so far none are prepared to divulge material comositions or properties. I hope you have more luck then me.
    • CommentAuthordragonbc
    • CommentTimeApr 18th 2007
     
    Our local council Uttlesford allows the use of multifoil instead of polyurethane . According to a Building Control officer someone (might be BRE) built two identical houses/rooms and insulated one traditionally and one with a multifoil . Then the rooms were tested for heatloss and the multifoil worked as well as the traditional insulation .
    • CommentAuthorarchie
    • CommentTimeApr 18th 2007
     
    I don't know of any research on this either, however, Building Control at one of my local Councils (Wokingham BC) is now allowing Tri-Iso following a bit of persuasion. It would be good to know if the stuff actually works consistantly and over a sustained period...
    •  
      CommentAuthorfostertom
    • CommentTimeApr 18th 2007
     
    All makes of multifoil are currently allowed by Building Control, provided you assume no greater insulation value than the Thinsulex accreditation, which isn't all that good and requires other insulation installed in tandem with it. That's fine by me - something like 80mm of Cellotex carefully fitted gapless between the rafters and multifoil/counterbattens etc either inboard or outboard of that deals with the cold bridging. Calculated result just scrapes thro' Bldg Regs but I'm confident that once the multifoil accreditation mess is sorted out, sometime after August, we'll find that spec actually provides excellent insulation. It's prudent - as conventional insulations perform as expected in steady-state conditions but only a fraction as well under dynamically-varying temperatures; while multifoils do the opposite; this spec covers all eventualities, until we understand multifoils better.
    •  
      CommentAuthorfostertom
    • CommentTimeApr 18th 2007
     
    I'm now specifying a min 35mm counterbatten depth with multifoils, because present multifoils are nom 30 thick and only work well if not touching anything. Of course they touch the counterbattening where it crosses but the hope is that that's only a small proportion of frontal area. However the usually-specified 25dp counterbattening ensures that the multifoil touches and gets compressed for the full length of every batten, in one direction at least if not both. So 35mm, preferably 40mm must considerably improve multifoil performance. If you can arrange your stud and/or rafter sheathing to be outside while the multifoil is inside, or vice versa, then you can dispense with one of the two counterbatten layers; e.g. 120h rafters (sheathed on top if reqd) with 80 Cellotex between (or 145h rafters with 100 Cellotex between) leaves 40-45mm as half the zone that the multifoil needs, to wander around in. 35h counterbattens beneath provide the other half; plasterboarded below.
    • CommentAuthorGuest
    • CommentTimeApr 22nd 2007
     
    I Live in Rural France and have recently used multifoil between kitchen ceiling and bedroom above the mice love it and after 6 months it looks like a seive whereas rockwool in the adjacent room has not been touched
  3.  
    Guest, Can I ask why would you use multifoil between two heated spaces?
    • CommentAuthorbiffvernon
    • CommentTimeApr 22nd 2007
     
    For the enjoyment of the mice, of course.
    • CommentAuthorbiffvernon
    • CommentTimeApr 26th 2007 edited
     
    I visited a site today where someone was converting an outhouse to a living room and was very proud to show me the space-age spin-off new material she was having installed. 50cm solid stone wall, 25mm multifoil, plasterboard, skim. The architect specified it, Building Control approved it.

    I notice the new edition of Clean Slate, the CAT magazine, has an article about multifoils.
  4.  
    Is the article complimentary about them?
    • CommentAuthorbiffvernon
    • CommentTimeApr 27th 2007
     
    No. The article tries to present the various strands of the debate fairly but the author Joel Rawson, of CAT Information Services, concludes, "Until claims can be proven, the potential of more insulation from less material is not borne out."
    •  
      CommentAuthorfostertom
    • CommentTimeApr 27th 2007
     
    Posted By: biffvernon"Until claims can be proven, the potential of more insulation from less material is not borne out."
    Does the author explain why "claims *can't* be proven so far? That the testing bodies until recently refused to ratify broadened testing methods that would fairly test multifoils' novel operating principle? Because such broadened testing methods would expose the falacious basis under which conventional insulations have been rated and marketed for decades? That as a result of the multifoil manufacturers' research evidence, such broadened testing was reluctantly accepted in principle by Europe's testing bodies last January and following development of reliably replicable protocols, the new testing methods are due to be launched in August?

    What if the claims *are* then proven? Will disbelief still persist? Until then, how many of the otherwise broadminded contributors to this forum will remain convinced that multifoils will fail the tests? Why then is so much new money being pumped into the multifoil companies, almost as if the manufacturers have long since done every conceivable test, to the full satisfaction and enthusiasm of their new backers?

    "Until claims can be proven, the potential of more insulation from less material is not borne out" - simply means "wait and see" in normal language.
    • CommentAuthorbiffvernon
    • CommentTimeApr 27th 2007 edited
     
    Posted By: fostertomDoes the author explain why ...
    No. Look, it's only a one page article, not a zillion page thread spanning two Green Building Forums.
    •  
      CommentAuthorfostertom
    • CommentTimeApr 27th 2007
     
    No, you're welcome Keith.

    Posted By: biffvernonLook, it's only a one page article
    OK Biff, but I was really countering *your* over-clear "No" to the question "Is the article complimentary about them?".
    • CommentAuthorbiffvernon
    • CommentTimeApr 27th 2007
     
    Yes Tom, I guessed so :)

    Yes Keith, I guess so :(
    • CommentAuthorRBean
    • CommentTimeMay 2nd 2007 edited
     
    I don't have an issue with the benefits of reflective foil insulation, BUT I have a major issue with marketing masquerading as science...anytime the non technical person buys without understanding context they have been mislead. As such we are taking the issue to task and have created a full web page; listing articles, excerpts with links to the U.S. Federal Trade Commission and their comments on foil insulation including a publication on a lawsuit against one manufacturer, Canada's NRC/IRC and CMHC with their reports, commentary from The North American Insulation Manufacturers Association and numerous others. We also take to task with three examples from an industry association and a manufacturer both being nebulous with their web text. Feel free to use the links for your own database. http://www.healthyheating.com/Page%2055/Page_55_o_bldg_sys.htm

    RBean
    Registered Engineering Technologist
    Building Construction
    Editor Journal of Indoor Environmental Quality
    •  
      CommentAuthorfostertom
    • CommentTimeMay 2nd 2007
     
    Paul in Montreal, do you know these guys? If not self-appointed, then appointed by whom?
  5.  
    I've heard of them through another forum - all the articles they list are from credible sources and so make for interesting reading. They don't sell any products directly themselves but do represent radiant heating (nothing necessarily wrong with that). As R Bean says, there's nothing wrong with reflective foil insulation, the problem is the marketing claims that, in many cases, are misleading (to say the least in certain cases). A fool and his money are easily parted - people have a propensity to go for solutions that have no basis in science. Just witness the countless number of wonder products based on magnets (curing illness, increasing mpg in cars and all sorts of other rubbish). Sad to say that people pay good money for things that are marketed with pseudo-scientific claims that, of course, are never reproducible in actual testing.

    I have used "double bubble" material in a renovation and it does the job I ask of it (and wasn't particularly expensive compared to, say, tri-iso-10 (about 10x less per sq m actually)) but it certainly doesn't have (nor claim) any magical properties.

    Paul in Montreal.
    •  
      CommentAuthorfostertom
    • CommentTimeMay 2nd 2007
     
    Thanks Paul
  6.  
    There is no magic product for insulation.
    Insulation is not just about heat performance is it. What about noise and air filtration, fire and vermin (I prefer our furry friends) amongst other things.
    Everything has its place after all. Hope this is a succinct summary.

    multifoil insulation is great if;
    Used on building fabric exposed to excessive solar gains
    refurbishing a space with space limitations which retains existing building fabric and services
    the occupants are concerned about emf
    Used as one of the methods alongside more conventional and sustainable insulators
    it isn't stapled with lots of long steel staples (thermal bridges)
    used as part of filtration reduction measures

    multifoil insulation is not so great if;
    The building is a heritage type airy high thermal mass transpiring buiilding
    You want a cavity for services routes
    Used in damp locations
    Used as an acoustic layer
    Poorly installed
    sources of ignition/heat are close (orrible gasses are released and it burns like hell)
    not overlapped sufficiently at building junctions.

    Any others?

    regards
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press