Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building
"The most popular book on green building in the UK today."
New fourth edition in two volumes!

Order both books now for the combined price of just £9.95
and free delivery!

(free delivery applies to UK addresses only).

Or get both books for just £7.90 if purchased at the same time as a subscription to Green Building magazine





Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    • CommentAuthorglev26
    • CommentTimeDec 2nd 2016
     
    I am new to this forum and am hoping for some advice, I had an Ecodan 14kw system installed about 5 years ago and would like a few upgrades i.e a magaclean filter added a power flush and gycol readded and some external lagging redone.

    I am having a few radiators changed and dew to some poor design i need to drain down the whole system.

    I have been quoted over £800 which i feel is way over the top, I am looking for someone in London that can help me. I have already purchased 25 litres of glycol.

    I am not very technical and very bad at DIY.

    Thanks
    • CommentAuthorDarylP
    • CommentTimeDec 2nd 2016
     
    errrr ....you don't want glycol in the rads, do you?
    the rads are filled with stabilised/inert water and Fernox inhibitor (or similar)?
    the glycol is in the ASHP condenser/evaporator circuit?
    I was a plumber for over 7 years, and I never put glycol in the rads, but things might have moved on since then...?:confused:
    PowerFlush is to clean / dislodge the crud that builds up inside steel rads due to oxidation, and which blocks up the channels/pipework.
    You can achieve a similar effect with a rubber mallet and a hose......:bigsmile:
    • CommentAuthorglev26
    • CommentTimeDec 2nd 2016
     
    I thought the central heating system which the ASHP heat where one in the same, I have been in touch with the original installer who now lives in Spain and he said that i would need 25 litres of Fernox Alpha 11 put back into the system to stop the pipes from freezing after it is drained down.

    http://www.fernox.com/products/water+treatment+chemicals/inhibitors/antifreeze+protector+alphi-11

    So i am now even more confused.
    • CommentAuthorglev26
    • CommentTimeDec 2nd 2016
     
    sorry i am dyslexic so i dont always make sense when typing until after i have posted comments...
    • CommentAuthorglev26
    • CommentTimeDec 4th 2016
     
    Can anyone recommend a London based company to service my Heat Pump ?
    • CommentAuthorcjard
    • CommentTimeDec 7th 2016 edited
     
    Servicing them pretty much amounts to vacuuming accumulated crap out of the air exchange fins. When was the last time you called Samsung out to service your fridge?

    My ASHP / UFH has about 70 litres of fernox HP-5c sloshing around along with all the water (approx 260litre system). My father in law's system has a similar amount of sentinel r500. Both products are anti freeze and corrosion inhibitors. Critically, they don't really kill you if they leak into the hot water system and you end up drinking a bit. Otherwise I'd have used car antifreeze :)
Add your comments

    Username Password
  • Format comments as
 
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press