Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

PLEASE NOTE: A download link for Volume 1 will be sent to you by email and Volume 2 will be sent to you by post as a book.

Buy individually or both books together. Delivery is free!


powered by Surfing Waves




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    • CommentAuthorgravelld
    • CommentTimeJun 28th 2017
     
    That goes for all construction methods doesn't it?
    • CommentAuthortony
    • CommentTimeJun 28th 2017
     
    Almost all, yes
    • CommentAuthorgravelld
    • CommentTimeFeb 14th 2018
     
    Wanted to follow up with a couple of things...

    First, the "Box Haus" mentioned earlier using EWI adhesive as the parge coat achieved 1.18 ACH (not sure what that was in UK BR permeability measurements) https://thebox-haus.weebly.com/posts/so-close

    I'm also wondering about belt and bracing: use render as the first layer, then spray over with https://www.ecomerchant.co.uk/walls/airtightness-products/blowerproof-liquid-airtightness-system/blowerproof-liquid-spray-applied-airtight-sealing-membrane-10kg.html . Will probably be expensive though.
  1.  
    Having seen the picture of the insulation going on at this link
    https://thebox-haus.weebly.com/posts/so-close
    IMO the brick wall will have to be very flat to get good adhesion with the thickness of the adhesive they seem to be using. I would be concerned about insufficient contact between the insulation and the adhesive caused by lumps/bumps holding the insulation of the wall
    • CommentAuthorgravelld
    • CommentTimeFeb 15th 2018 edited
     
    Yes, I've seen that concern before about continuous adhesive application. Although not sure if it would compromise the AT.

    Maybe it gets "pushed aside" too much, thus making it discontinuous?
  2.  
    It is not a concern about compromising the AT but rather the adhesion of the (very unbendable) thick EPS
Add your comments

    Username Password
  • Format comments as
 
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press