Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

Buy individually or both books together. Delivery is free!


widget @ surfing-waves.com




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    • CommentAuthornigelm
    • CommentTimeNov 9th 2017
     
    I have a number of steel beam ends sitting on top of a stone wall effectively creating thermal bridges. These are only 50mm Square beams, not carrying huge loads, maybe 150kg each. I am looking for an insulating material for the beams to sit on. I can then insulate arround and inside the steel ends mitigating the thermal bridge.
    I would use timber pads but they would be in the insulation layer and eventually rot out.
    • CommentAuthortony
    • CommentTimeNov 9th 2017
     
    Foamglass?
    • CommentAuthorTimSmall
    • CommentTimeNov 9th 2017
     
    You need to know the worst case load under the beam ends, and the area of the beam which will bear onto the thermal break material. That will allow you to calculate the bearing pressure.

    These might be suitable depending on the bearing pressure:

    1. High strength AAC block (use DPM/DPC to keep dry)
    2. Low strength AAC block (use DPM/DPC to keep dry)
    3. Foamglass
    4. Compacfoam
    5. Purinit
    6. XPS

    That's in order of compressive strength (high to low), and also in order of thermal resistance (low to high)
    •  
      CommentAuthorfostertom
    • CommentTimeNov 9th 2017
     
    If you put a spreader plate or padstone under the beam end, the bearing pressure under that will be reduced to a fraction and a lo-strength hi-insulation material might do - but of course the insulated (heat transmission) area has increased pro rata - but then again that's only part of the insulated area (non-loadbearing top/sides/end of the beam).
Add your comments

    Username Password
  • Format comments as
 
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press