Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

Buy individually or both books together. Delivery is free!


widget @ surfing-waves.com




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    • CommentAuthorTimSmall
    • CommentTimeFeb 2nd 2018
     
    Does anyone know of a cheap ASHP ("air to water") with an output in the region of 3 kW or so? I've looked but can't find one.

    The irritating thing is that you can buy 2.5 kW to 3.5 kW heat output mini-split ASHPs with SCOPs of 5 or better (the new-ish R32 units from Mitsubishi and Daikin) for about £700 to £1000, but they're all sold with a single indoor unit (the wall-mounted indoor unit houses a refrigerant-to-air heat exchanger with a fan, plus some controls electronics, but no more than that).

    If you want air to water heat pumps, you're quickly into the £3500+ zone for larger units with lower SCOPs (which use the less efficient, but higher GWP R410a refrigerant).

    If you are feeling adventurous it's possible to convert these sub £1000 units into "air-to-water" heat pumps. To do this, you substitute the whole indoor unit with a refrigerant-to-water flat plate heat exchanger (available for around £100), with some adaptation to or replacement of the indoor unit's electronics to keep the outdoor unit happy. In the UK this would need an "F-Gas" certification, and I suspect any warranty claims might be tricky...

    Another approach I've found people using is to buy a second-hand de-gassed older generation mini-split (R22 or R410a based) for circa £100 to £200, carry out the above air-to-water modification and then charge it with propane (R290) - which has a very low global warming potential, so doesn't need F-Gas certification.

    Since propane is flammable, you'd want to keep it outdoors by putting the flat-plate exchanger outdoors (much like the Mitsubishi Ecodan and other commercial heat pumps do anyway).

    To add to the list of creative heat pump hacks that google has turned up, I also found a few examples of people converting small ASHPs to be hybrid air-source and ground-source heat pumps, by adding a small ground loop to bump up the COP. In heating mode the evaporated refrigerant passes through the refrigerant to air heat exchanger as usual, and then goes through a second refrigerant to water exchanger (the water then passing through the ground loop).

    This has the advantage of needing a fraction of the ground works of a conventional GSHP (to the extent that for a small unit, you can make do with throwing in some plastic pipe when you're trenching for drains and telecoms etc. anyway), and that you can automatically turn off the ground part when the air temperature is higher than the ground temperature (e.g. spring/summer).

    Perhaps it's better to wait for the 5 kW Mitsubishi Ecodan to come out in a higher-efficiency R32 version, and then wait a couple more years for them to come onto the second hand market - after some new-build houses fit Ecodans only to have the occupants later change them out for bigger gas boilers because they can't cope with the actual heating load...
    •  
      CommentAuthorfostertom
    • CommentTimeFeb 3rd 2018 edited
     
    Gor blimey - another world! Sounds fun tho.

    Seen the brilliant, long 'everything about ASHP' article in the latest Passive House Plus mag?
    • CommentAuthorSilky
    • CommentTimeFeb 5th 2018
     
    I've seen lots of seemingly cheap ones on ebay and amazon in Germany e.g. search for Michl 4kw in ebay.de, less than a grand COP 4.2

    related question, aside from price, what are the (presumably negative) consequences of over-sized heat pumps? I wanted to explore the idea of 2 or 3 smaller (and cheap) heat pumps rather than a large one and/or separate heat pumps for DHW (water) and heating.
Add your comments

    Username Password
  • Format comments as
 
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press