Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

PLEASE NOTE: A download link for Volume 1 will be sent to you by email and Volume 2 will be sent to you by post as a book.

Buy individually or both books together. Delivery is free!


powered by Surfing Waves




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    • CommentAuthormattrgee
    • CommentTime5 days ago
     
    Hi all,

    Following on from my recent thread regarding the insulation of a suspended timber floor, I have a further question regarding the use of a VCL.

    As a recap, I am fitting Celotex between the joists of my suspended timber floor, all joints are being taped resulting in the joist tops also covered.

    I had intended to lay a polythene VCL over the Celotex and joists, however, I was advised at the weekend that the foil backing of the Celotex is a VCL in itself and laying a further polythene VCL over the top, could trap moisture. I was consequently advised not to do this.

    I have already bought a polythene VCL to lay, so really the question is: will laying it over the Celotex cause an issue or is a second barrier an advantage?
  1.  
    Your VCL, on the warm side of the sandwich, is designed to stop vapour *from the house* getting into the insulation layer and below. You are right that the taped Celotex could be a VCL in itself, if taped really well at all joints and perimeters. On the other hand you are going to be climbing all over the joists and insulation in your big boots, so is the foil as tight as you thought it was? I use a heavy-gauge VCL in such circumstances. Even if you do end up with some sort of gap between 'Celotex VCL' and 'VCL VCL', it's on the warm side, so I am not clear where the moisture that you might trap is going to have come from.
    • CommentAuthortony
    • CommentTime4 days ago
     
    I do poly for air tightness what will you be doing for that
Add your comments

    Username Password
  • Format comments as
 
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press