Sat, 02 May 2026 16:18:09 +0100 https://www.greenbuildingforum.co.uk/newforum/ Lussumo Vanilla 1.0.3 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281521#Comment_281521 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281521#Comment_281521 Wed, 17 Jun 2020 19:14:45 +0100 Triassic
The grid current sensor clips need to be on the incoming supply. Unfortunately the incoming supply and meter is in outbuilding about 80 metres from the house. I’ve looked at the wireless sensor, but I don’t thing it will work as we can’t even get a mobile phone signal in most of the house. I was wondering if I could simply extent the sensor cables to the outbuilding from the plant room?]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281523#Comment_281523 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281523#Comment_281523 Wed, 17 Jun 2020 19:48:17 +0100 goodevans
How much power is in use outside of the house (e.g. in the outbuilding)? If you are lucky it is either very little or very consistent - In either case put the clip on the cable coming into the house - and change the thresholds on the Eddi diverter to account for any usage that may be used outside of the house.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281524#Comment_281524 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281524#Comment_281524 Wed, 17 Jun 2020 20:37:36 +0100 djh https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281526#Comment_281526 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281526#Comment_281526 Wed, 17 Jun 2020 20:43:14 +0100 djh https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281575#Comment_281575 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281575#Comment_281575 Thu, 18 Jun 2020 21:15:50 +0100 Triassic
I could clip the sensors on the cable as they enter the house. I’ve not seen an Eddi sensor cable, are they something special?]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281576#Comment_281576 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281576#Comment_281576 Thu, 18 Jun 2020 22:15:58 +0100 philedge
The manual is quite specific about siting the CT sensor before any of your load so may need to go in your outbuilding]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281710#Comment_281710 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=281710#Comment_281710 Wed, 24 Jun 2020 21:08:50 +0100 nigel
Mine goes through 2 walls and about 40m and works fine.

The sensor is just a clip round the wire, nothing special.

If the feed into your house carries all the supply then it will work fine connected as it comes into the house.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=284054#Comment_284054 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=284054#Comment_284054 Fri, 23 Oct 2020 12:30:07 +0100 Doubting_Thomas
I was hoping to extract data from it like you can with the SolarEdge (i.e. CSV file). We have grid imports from our own meter logging and PV generation data from the SolarEdge, but I can't tell how much we actually use historically without knowing what's been diverted from our exports.

The data appears to be there on the app (albeit estimated from CT clamp), but I can't see a way to extract it and there's still no web interface I believe.

Has anyone done it successfully?]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=284081#Comment_284081 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=284081#Comment_284081 Sat, 24 Oct 2020 18:05:12 +0100 jamesingram https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=284085#Comment_284085 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=284085#Comment_284085 Sat, 24 Oct 2020 18:17:28 +0100 DamonHD
http://www.earth.org.uk/note-on-solar-DHW-for-16WW-UniQ-and-PV-diversion.html#Eddi

But maybe you're asking something different than I was.

Rgds

Damon]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=284128#Comment_284128 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16614&Focus=284128#Comment_284128 Tue, 27 Oct 2020 10:39:45 +0000 Doubting_Thomas
Thanks, that link is helpful.

It's definitely possible to poll the server through a web browser and I've achieved this successfully, but I haven't yet found a way to get this data as a bulk download (i.e. hourly data compiled for several months) without learning Python scripting which is tempting but time consuming.]]>