Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

PLEASE NOTE: A download link for Volume 1 will be sent to you by email and Volume 2 will be sent to you by post as a book.

Buy individually or both books together. Delivery is free!


powered by Surfing Waves




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    • CommentAuthorMAHARRIS
    • CommentTime4 days ago
     
    I have had some alterations done to my house and the solar connects to the hot water tank then goes to the pool via a three way valve/thermostats. The old system included dump radiators, but do I actually need these dump rads when the heat is already diverted into the pool. (The pool is about 9m x 4m x 1.6m)
    • CommentAuthortony
    • CommentTime4 days ago
     
    Perfect application for solar thermal is a large volume of water heated a bit

    I have a friend who has unseated pool, thinking of several big bits of black poly floating on broom poles weighted down to float vertically and cover pool at night with bubble wrap
    • CommentAuthorEd Davies
    • CommentTime4 days ago
     
    What's needed for solar thermal is a system which is fail safe in the proper meaning of the term: that is, a system which will be safe if it fails.

    The question then is would that be true of the diversion to the pool - e.g., what happens if the three-way valve or thermostats become stuck in any plausible state and if the safety relies on redundancy will it be obvious if that redundancy is lost (e.g., if there are two thermostats and one sticks will there be an indication of that).

    How do you transfer the heat to the pool water? If it is, as I assume from the size, a swimming pool then presumably it has chlorine or salt or something in it so I'd guess there's a heat exchanger somewhere as that's not the sort of water you want going through most solar thermal panels. Is there a pump on the pool water circuit for that? What if it fails?
    • CommentAuthorCWatters
    • CommentTime4 days ago
     
    I think there should be a Pressure Relief Valve somewhere that deals with the safety issue of a stuck diverter.
    • CommentAuthorEd Davies
    • CommentTime4 days ago
     
    Assuming an unvented cylinder, a PRV is, of course, necessary and useful but I don't think it's sufficient for a cylinder fed from a solid-fuel boiler so I don't see why it would be for solar thermal, either.
  1.  
    Building regs/stds for unvented systems require: a control thermostat plus two extra safety devices, such as a thermostat AND a thermal cutout AND a temperature-pressure relief valve.

    Alternatives are allowed if they give equivalent protection, for example a solid fuel burner can't have a thermal cutout so it needs to have gravity dump radiator/s instead.

    Unvented systems are supposed to be installed by people who can demonstrate competence, such as with a registration scheme, they can then self-certify the installation without it needing to be inspected.

    This is all technically a requirement for hot water storage systems, but seems to be widely applied, eg to central heating systems.
    • CommentAuthorowlman
    • CommentTime4 days ago
     
    Hi Melodie, welcome. Based on my own Solar thermal experience and from the size of your pool I wouldn't think you'll have any problems discharging excess heat into it. I've no idea where you are but assuming UK, and assuming a fairly standard sized array, and not something vast, the pool should easily absorb any excess. Of course, I've no idea of your particular system layout.
    You may have a combined pressure/temperature relief valve which should be attached to a tundish, with visible discharge as your safety, if your system is pressurised.
Add your comments

    Username Password
  • Format comments as
 
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press