Sun, 19 Apr 2026 03:19:50 +0100 https://www.greenbuildingforum.co.uk/newforum/ Lussumo Vanilla 1.0.3 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16791&Focus=287321#Comment_287321 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16791&Focus=287321#Comment_287321 Mon, 08 Feb 2021 20:55:44 +0000 Dominic Cooney With being completely enamoured with UFH (put it in the last 2 places, really miss it in this farmhouse, so have put it in the stone barn conversion) perhaps we should go for a thin layer of foil-faced PIR and then UFH pipes to avoid too much of a floor build-up, whilst still doing the downstand EWI to foundations to minimise heat loss.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16791&Focus=287322#Comment_287322 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16791&Focus=287322#Comment_287322 Mon, 08 Feb 2021 21:06:42 +0000 Dominic Cooney Was thinking 200 or 300 EPS EWI
Would also be happy to come out horizontally from there with an EPS skirt but wondering how it compares cost wise with something like LECA.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16791&Focus=287324#Comment_287324 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16791&Focus=287324#Comment_287324 Mon, 08 Feb 2021 21:17:55 +0000 djh Posted By: Dominic CooneyI suppose an uninsulated concrete floor slab (as in the current situation with this building) is always going to 'feel' cold compared to the room.
The feel of a surface is largely to do with its thermal admittance. Some surfaces, like concrete or stone, are inherently 'cold' because they conduct heat away from your hand or foot quite quickly. Timber or EPS or cork conduct heat away less rapidly and feel 'warm' because of this. Hence people like carpet and wood floors and cork mats in bathrooms etc. Changing the surface will be cheaper than installing UFH, although it doesn't do quite the same job.]]>