Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

PLEASE NOTE: A download link for Volume 1 will be sent to you by email and Volume 2 will be sent to you by post as a book.

Buy individually or both books together. Delivery is free!


powered by Surfing Waves




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    • CommentAuthorShevek
    • CommentTimeJan 30th 2021
     
    Am I right in saying there is nothing on the market like Compacfoam that's non-combustible?

    That is:
    1. Suitable for taking a the load and fixings of a door
    2. Non-combustible
    3. Provides insulation
    •  
      CommentAuthordjh
    • CommentTimeJan 30th 2021
     
    Foamglas Perinsul?

    Though I expect Compacfoam has fire retardants in it. Don't know though.

    Door fixings are normally through the sides, so I'm not clear what load they would take?
    • CommentAuthorShevek
    • CommentTimeFeb 3rd 2021
     
    Thanks Dave, I did think about Foamglas but none of their details online show it being used under a door. And the door I'm talking about is 6 m wide, so needs fixing somewhere along the bottom to provide lateral restraint. But I guess we could fix back to the slab with lugs, as long as the the foamglas can take the dead load of the door.
    • CommentAuthorShevek
    • CommentTimeFeb 3rd 2021
     
    Found this:
    https://perinsul.foamglas.com/en-gb/thermal-bridging-advice/how-to/how-to-install-under-windows-door-sills

    "Fixing positions for a door or window are determined by the manufacturer. It is not recommended to fix through PERINSUL HL blocks, as this has a detrimental impact on their function as a thermal break.
    Fixings can be made through a perpend joint, and it is therefore advised to consult with the door or window manufacturer, and FOAMGLAS®, to agree an appropriate fixing method based on the requirements of the project.
    To prevent point loads acting on the PERINSUL HL units, a supporting board such as fibre cement should be laid on the units. The door or window can then be installed with a full mortar bed on the supporting board."
    • CommentAuthorwookey
    • CommentTimeFeb 18th 2021
     
    Perinsul blocks don't take fixings usefully - they just chibble up. Whereas compacfoam takes screws pretty well. But perinsul will take the dead load, so yeah you'll just have to work out how to do the lateral fixings (stainless strapping)?
    Is the base of the door really going to catch fire? Can't you add a fireproof layer behind/in-front-of the compacfoam to satisfy any burn-time/fire spread requirement?

    compacfoam is described as having 'moderate' fire resistance here: https://materialdistrict.com/material/compacfoam/
    And 'Euroclass E' here: https://www.partel.co.uk/product/55/5/compacfoam which is quite bad.
    And 'E(B1) flame-retardant' on the datasheet: https://www.compacfoam.com/wp-content/uploads/2019/11/Datenblatt_CF_E_2019.pdf
    • CommentAuthorShevek
    • CommentTimeFeb 26th 2021 edited
     
    Posted By: wookeyIs the base of the door really going to catch fire? Can't you add a fireproof layer behind/in-front-of the compacfoam to satisfy any burn-time/fire spread requirement?

    That's a very good idea, thanks. We could probably use some of this stuff:
    http://thermalbridgingsolutions.com/thermal-break-products/thermal-break-material-tbm-3

    I will run it past building control.

    The driver here is the new BS 8579 2020, requiring that buildings with an occupied floor over 11 m have non-combustible materials to balconies where they may be used for escape.
    •  
      CommentAuthordjh
    • CommentTimeFeb 26th 2021
     
    Posted By: ShevekWe could probably use some of this stuff

    All the certifications/data seem to be American. Is it available here?
    • CommentAuthorShevek
    • CommentTimeFeb 26th 2021
     
    Oh shit, I could have sworn I was looking at a UK site!
    • CommentAuthorShevek
    • CommentTimeFeb 26th 2021
     
    In the mean time, I did find this image on Foamglas' website, which demonstrates nicely their description of loading the door on top of the Foamglas as long as a fibre cement board is laid over top first.
      3D image window.jpg
Add your comments

    Username Password
  • Format comments as
 
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press