Green Building Forum - Second hand solar PV panels Sun, 19 Apr 2026 14:25:08 +0100 https://www.greenbuildingforum.co.uk/newforum/ Lussumo Vanilla 1.0.3 Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308928#Comment_308928 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308928#Comment_308928 Mon, 04 Aug 2025 12:39:30 +0100 Jeff B 2025
There was nothing wrong with the existing panels but it did not make economic sense (particularly labour cost) to remove all the existing panels/microinverters, then remount the old panels and rewire with DC cabling as new panels are so much cheaper now. So I now have a brand new system with new warranties which at my age should “see me out” as they say, hopefully until the end of the F.I.T. payments in 2031 at least!

Hence I have twenty one fully functioning 185W panels for sale. They were installed by an MCS registered company but I have no idea of their current value. Any ideas as to what I should be looking for?

Thanks.
Jeff]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308932#Comment_308932 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308932#Comment_308932 Mon, 04 Aug 2025 19:38:09 +0100 philedge
If you've changed the total capacity of the panels/system don't forget to notify your FIT payer]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308933#Comment_308933 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308933#Comment_308933 Mon, 04 Aug 2025 22:43:54 +0100 Jeff B 2025 Posted By: philedgeHave a look on ebay but I'd guess £10-£20 a piece.

If you've changed the total capacity of the panels/system don't forget to notify your FIT payer

Thank you. I've had a look on eBay and I can't find used panels like mine i.e. 185W, most seem to be of higher output so difficult to compare. However there are some around the 200W mark and they are of the order of £30 to £35. Maybe I should go for £20 ono.

Yes, I submitted an actual specification and drawings of the proposed layout from the solar PV installer to the FIT provider before I signed the contract with the former. I didn't want to take any chances and got written approval from the FIT provider company. The output of the old system was 3885W (21 x 185W) and the new one is 3600 (8 x 450W), so slightly less.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308934#Comment_308934 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308934#Comment_308934 Tue, 05 Aug 2025 07:13:02 +0100 philedge Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308935#Comment_308935 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308935#Comment_308935 Tue, 05 Aug 2025 10:05:27 +0100 sgt_woulds
Unfortunately, the used prices are about £20-45 per panel, irrespective of the quality of the panels.

Used Tier-1 Sanyo/Panasonic panels can be had for the same price as a nasty no-name Tier 3. You might get more selling it as a complete system with the micro inverters and roof rails.

I feel your pain regarding the microinverters - we stopped installing them except on single-storey or flat roofs with easy access, or ground mount systems.

Even the good ones had very high failure rates, and the guarantee only covers the inverter, not the scaffolding and labour to replace.

Do you know the make and models of your panels and inverters?]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308936#Comment_308936 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308936#Comment_308936 Tue, 05 Aug 2025 11:06:33 +0100 SteveZ
Our system is the SolarEdge with each panel having an Optimiser on it, fitted in 2012. So far we have had three optimisers fail. The first on one was replaced by an installer using a ladder in a few minutes. The second apparently needed scaffolding erected just outside our kitchen door and took a few phone calls to get it removed quickly. Both were replaced under warranty.
Recently the third failure showed up on the system display and I am reluctant to bother reporting it as they seem to use scaffolding as the norm. Bearing in mind the system is on a bungalow, and as I read the scaffolding access recommendations, any job taking under 30 minutes does not necessarily require scaffolding, subject to a risk assessment, has anyone had experience in persuading the installer replacing the failed item that it is OK to use a ladder or tower access for such a simple job?

At our local Agricultural Show, I was offered for £10k a complete Sunpower system of 12 of their gen 7 panels (6kW total), 11Kwh Sunpower batteries and the hybrid 2 string inverter, including installation and the complete and very long and comprehensive Sunpower warranty. A quick scan on the internet make this look like a very good manufacturer and a pretty good deal. We have a large West-facing roof ready and waiting ..........

I think persuading my missus to go for it will take more effort than I can muster, but it is very tempting]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308937#Comment_308937 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308937#Comment_308937 Tue, 05 Aug 2025 11:16:53 +0100 philedge Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308938#Comment_308938 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308938#Comment_308938 Tue, 05 Aug 2025 13:11:53 +0100 sgt_woulds
We always thought that micros (Enphase, Renesolar,etc) tended to suffer from heat soaking and suffer more from batch quality control than optis.

No professional insured workman will ever work off a ladder to remove to replace a panel - that is simply not a safe working practice.

Any roof monkey who is prepared to risk their own life to save a few quid will also not care much about you, your roof or your panels.

No reason for a full scaffold, though; a properly secured platform tower is perfectly adequate if it can be placed squarely underneath the panels to be removed

Don't forget that as the homeowner, you are liable if a workman has an accident on your property.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308939#Comment_308939 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308939#Comment_308939 Tue, 05 Aug 2025 13:34:23 +0100 philedge
Re householders liability, I'm not sure householders are necessarily liable if a workman has an accident on your property. Most workmen you engage are engaged on the basis that they know more about their work than the householder- roofer, electrician, plumber etc so they are considered able to assess any risks and mitigate them. If mitigation fails then that's down to the workman. If the workman is employed then it's their employer who's responsible for their welfare.

AFAIK a householder only takes on liability if they knowingly or negligently didn't share their knowledge of a hidden hazard with a workman ie if I knew there were uninsulated cables under floor boards and a workman touched them and got electrocuted then there'd be a case for me to answer. The risk of falling off a roof while changing a panel is down to the solar installer to mitigate with a scaffold or rope and harness??]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308940#Comment_308940 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308940#Comment_308940 Tue, 05 Aug 2025 13:51:29 +0100 Jeff B 2025 Posted By: sgt_wouldsThe used panel market is flooded with panels from solar farm upgrades

Unfortunately, the used prices are about £20-45 per panel, irrespective of the quality of the panels.

Used Tier-1 Sanyo/Panasonic panels can be had for the same price as a nasty no-name Tier 3. You might get more selling it as a complete system with the micro inverters and roof rails.

I feel your pain regarding the microinverters - we stopped installing them except on single-storey or flat roofs with easy access, or ground mount systems.

Even the good ones had very high failure rates, and the guarantee only covers the inverter, not the scaffolding and labour to replace.

Do you know the make and models of your panels and inverters?
Thanks for your response. I would be happy to get £20 per panel!

My micro-inverters were made by Enecsys which was a university start-up company in the UK. As I understand it from a guy in the USA the originals were very good quality but as the demand increased manufacture was outsourced to Poland and China. Henceforth the quality declined. I think I must have had a mixture of both types in my system because over half are still the originals and were still working ok. I have even had replacements go pop on me! I know a guy who has Enecsys inverters and my intention is to offer mine to him FOC as long as he can arrange transport. (I have several new replacements plus of course all the good un's from my system).

Enecsys went bust not long after my system was installed so the "20 year warranty" wasn't worth the paper it was written on. We are in a bungalow but I understand that the law has changed now so I have had to pay for scaffolding every time an inverter failed and had to be replaced. Hence there is no way I would have micro-inverters or optimisers on the roof ever again. The new installer tried to tempt me with SolarEdge but I respectfully declined as I know these are not 100% reliable also. Also the warranty will only cover the cost of the kit not the removal/reinstallation etc.

My PV panels are Schuco and were made in Germany, so presumably good quality. All were working fine right up to the day they were decommissioned.

Jeff]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308941#Comment_308941 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308941#Comment_308941 Tue, 05 Aug 2025 13:54:08 +0100 Jeff B 2025 Posted By: philedgeBe careful being drawn in by long manufacturer warranties for anything on the roof. The cost of labour and access almost always largely exceeds the cost of a panel/optimiser/micro inverter and the manufacturers warranty is unlikely to cover the labour/access.

Agree!!!]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308942#Comment_308942 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308942#Comment_308942 Tue, 05 Aug 2025 14:03:21 +0100 Jeff B 2025 Posted By: philedgeHopefully with the new panels likely more efficient the slightly smaller capacity will still give the same generation and cash figures as the old ones

Yes, I have noticed a couple of things straight away.

Firstly the peak output on a blue sky day is now around 3.7kW whereas with the old system we never exceeded 3.4kW.

Secondly the new system starts to generate both much earlier and also later at the end of the day. I think this is because the micro-inverters wouldn't "wake up" until a certain minimum output was achieved - don't ask me what that was!]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308943#Comment_308943 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308943#Comment_308943 Tue, 05 Aug 2025 15:02:44 +0100 sgt_woulds


Work at Height Regulations 2005 (as amended):

places duties on employers, the self-employed, and any person that controls the work of others (for example facilities managers or building owners who may contract others to work at height).

As part of the Regulations, duty holders must ensure:

all work at height is properly planned and organised;
those involved in work at height are competent;
the risks from work at height are assessed and appropriate work equipment is selected and used;
the risks from fragile surfaces are properly controlled; and
equipment for work at height is properly inspected and maintained.


There is a simple hierarchy for managing and selecting equipment for work at height. Duty holders must:

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.


As a homowner, it is your duty to ensure a risk assessment has been conducted and that any works are conducted in a safe manner. Any risk assessment should work on the 'hierachies of risk' basis - to cut a long story short, you cannot justify working off a ladder alone.

In addition, under common law, the homeowner is ultimately liable for any injury on their property (even if the person injured was trespassing at the time), as well as for any affected member of the public on adjacent property.

When solar panels are dropped, it is rare for them to head straight down - they tend to glide at an angle and sometimes for a considerable distance.

I was nearly killed by a panel falling from a roof - even though I knew it was heading towards me - it wen't edge on and I lost sight of it until it grazed my neck! There were two children standing next to me watching the work... and we were on the public pavement next to the house.

So even if it is not you or the 'solar engineer' who is injured, it could easily be your elderly neighbour in her back garden, or the postman delivering your mail.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308945#Comment_308945 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308945#Comment_308945 Wed, 06 Aug 2025 08:59:06 +0100 philedge Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308946#Comment_308946 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308946#Comment_308946 Wed, 06 Aug 2025 10:26:30 +0100 Peter_in_Hungary Posted By: philedgeI'm pretty sure the law wouldnt put the onus on an unqualified homeowner to control a high risk activity. In a domestic environment, those in control of the work would be the business engaged to carry out the work whether they are self employed or a company.
I agree with this.
IMO If you employ someone to carry out works then that person has the responsibility for the work and the way it is carried out.

Over here e.g. if you employ a roofer to replace your roof, if he does it without a plan (drawing) then he has the liability, if it is done with a plan and he follows the plan then the liability is with the producer of the plan. But the contractor always has the liability for safe working.

For DIY work, when in the UK (and here BTW) my household insurance had a 3rd party liability clause which would cover e.g. things falling of a roof and hitting the postman. If the DIYer can show safe working practices (including signs etc.) I would expect this cover to apply to DIY work. Of course I would expect the insurance co. to try wriggle out of any liability as per their normal approach to claims.

Back to the use of scaffold to replace a PV panel - this is all part of the total risk aversion in the UK. They daren’t not use it.

Over here when my PV was put up (7M to the gutter line and a 35 deg roof) the workers used a ladder with lift attachment the get the panels up having first gone up the ladder to walk around the roof sliding the tiles up as needed to get a foothold on the tile battens.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308948#Comment_308948 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308948#Comment_308948 Wed, 06 Aug 2025 15:28:54 +0100 sgt_woulds
Its just being sensible. Even when working with all of the safety practices and gear, accidents still happen, and working at height compounds the consequences.

Ladders slide, tiles slip, sudden gusts of wind catch you by surprise, grit from the roof tiles gets blown into your eyes, a seagull tries to scalp you for being too close to her nest - I've experienced all of these and have been glad each time that I've been risk-averse enough to mitigate risks beforehand.

I've done the old kick up the tiles to make it easier to walk up a roof, but only ever with a platform beneath me. Battens can and do break on older roofs. Also, you are relying on the workmanship of the person who built the roof for the batten strength.

Hands up all the UK roofers on here who have come across rotten battens, or houses where the 'roofer' has only nailed to every other rafter, or where the batten has been 'joined' mid span?

Not such a problem in Europe, and especially Hungary, as the foreign battens seem to be on average twice the size of UK spec.

Having said that, most of the builders I know in Hungary like to have a tot of Palinka before starting work, so they probably would bounce just if they fell off the roof... :-)]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308949#Comment_308949 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308949#Comment_308949 Wed, 06 Aug 2025 16:46:37 +0100 Peter_in_Hungary Posted By: sgt_wouldsNot such a problem in Europe, and especially Hungary, as the foreign battens seem to be on average twice the size of UK spec.
The standard tile batten here is 30mm x 50mm, but our rafters are typically have 900mm centres and we use 100 x 150 rafters

Posted By: sgt_wouldsHaving said that, most of the builders I know in Hungary like to have a tot of Palinka before starting work, so they probably would bounce just if they fell off the roof... :-)

One of the best roofers I used drank 1.5 ltr of wine through his working day. Unfortunately he fell off a roof on a 4 story building in Budapest. End one good roofer. (luckily nothing to do with my projects)]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308951#Comment_308951 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308951#Comment_308951 Wed, 06 Aug 2025 23:53:47 +0100 Jeff B 2025
In my experience (unless shading is an issue, which it isn't in my case, but I just liked the idea of microinverters so I could monitor each panel individually) then keep it simple with a single inverter housed in a nice dry indoor location! My new system cost £2.8K which, as we are “pioneers” on the maximum FIT rate, should pay for itself in about 15 months.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308952#Comment_308952 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308952#Comment_308952 Thu, 07 Aug 2025 10:56:17 +0100 philedge
No reason not to access a roof on a ladder to measure a panel or check type or condition of roof covering. If you want to change an optimiser or clean an array use a rope and harness once on the roof. Use an alloy tower for a panel change. For me an expensive full custom scaffold is only appropriate for extensive repairs or installation works where the work is going on for hours/days and involves several people.

It's a tradesmans welfare/livelihood at stake with any accident so it's their call if they want scaffold for a minor job but they need to be mindful of going OTT with H+S and over time the cost of doing a job becomes prohibitive so it doesn't get done and they loose work]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308953#Comment_308953 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308953#Comment_308953 Thu, 07 Aug 2025 18:17:30 +0100 Jeff B 2025 Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308954#Comment_308954 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308954#Comment_308954 Thu, 07 Aug 2025 20:26:31 +0100 djh Posted By: Jeff B 2025The company that fitted our new solar PV system used what I can only describe as a kind of "hybrid scaffolding" - part tower, part interlocking horizontal bars.Any chance you have a photo?]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308955#Comment_308955 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308955#Comment_308955 Fri, 08 Aug 2025 10:53:52 +0100 WillInAberdeen
I inherited some that was left here when we bought our place. It's heavy duty stuff but can be put up without traditional skilled scaffolders. Some skill is required though to get it straight and stable.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308969#Comment_308969 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308969#Comment_308969 Sat, 09 Aug 2025 13:46:01 +0100 Mike1 Posted By: philedgeI don't think the average homeowner will have the knowledge and experience to control working at height so the regs wouldn't apply to them?
One thing that would apply is the Construction (Design and Management) Regulations; they apply to all building and construction work. In particular the designer has a duty to eliminate or reduce risks to those who will have to maintain the works. For a PV installation, for example, that might include providing suitable anchoring points for harnesses, if that's the expected means of access for maintenance.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308971#Comment_308971 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308971#Comment_308971 Sat, 09 Aug 2025 15:37:54 +0100 djh Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308974#Comment_308974 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308974#Comment_308974 Sat, 09 Aug 2025 22:44:10 +0100 Jeff B 2025 Posted By: djh
Posted By: Jeff B 2025The company that fitted our new solar PV system used what I can only describe as a kind of "hybrid scaffolding" - part tower, part interlocking horizontal bars.
Any chance you have a photo?

No, sorry.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308975#Comment_308975 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308975#Comment_308975 Sat, 09 Aug 2025 22:45:19 +0100 Jeff B 2025 Posted By: WillInAberdeenWas it Quickstage/Kwikstage with interlocking wedge joints that are hammered in tight?

I inherited some that was left here when we bought our place. It's heavy duty stuff but can be put up without traditional skilled scaffolders. Some skill is required though to get it straight and stable.

I'll contact the installer and ask for the name of the system they used.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308990#Comment_308990 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308990#Comment_308990 Wed, 13 Aug 2025 08:14:41 +0100 revor When I needed to get the rendering done I had to take it down and get "normal" tubular scaffolding errected by a scaffold company as the rendering contractor would not otherwise be insured.]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308997#Comment_308997 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308997#Comment_308997 Wed, 13 Aug 2025 21:55:23 +0100 fostertom Posted By: Jeff B 2025In my experience (unless shading is an issue, which it isn't in my case, but I just liked the idea of microinverters so I could monitor each panel individually) then keep it simple with a single inverter housed in a nice dry indoor location!Good to know. Why can't microinverters be housed 'nice and dry' in the loft, even if remote from its panel?]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308999#Comment_308999 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=308999#Comment_308999 Wed, 13 Aug 2025 22:46:53 +0100 Jeff B 2025 Posted By: fostertom
Posted By: Jeff B 2025In my experience (unless shading is an issue, which it isn't in my case, but I just liked the idea of microinverters so I could monitor each panel individually) then keep it simple with a single inverter housed in a nice dry indoor location!
Good to know. Why can't microinverters be housed 'nice and dry' in the loft, even if remote from its panel?

I also asked this question at the time. All I can remember was that there was an issue with the length of cables that would be required if all the cables were to have a single point of entry through the roof. It made no sense to me. However there is an interesting discussion on this subject here:

https://forums.mikeholt.com/threads/micro-inverters-in-the-attic.146062/

I must admit I hadn't considered the temperature aspect. I do remember being concerned about the possibility of fire in the attic as this could start entirely unnoticed until it really took hold!]]> Second hand solar PV panels https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=309000#Comment_309000 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328&Focus=309000#Comment_309000 Wed, 13 Aug 2025 22:48:13 +0100 Jeff B 2025 Posted By: Jeff B 2025
Posted By: WillInAberdeenWas it Quickstage/Kwikstage with interlocking wedge joints that are hammered in tight?

I inherited some that was left here when we bought our place. It's heavy duty stuff but can be put up without traditional skilled scaffolders. Some skill is required though to get it straight and stable.


I'll contact the installer and ask for the name of the system they used.

It was Cuplock apparently.]]>