Green Building Bible ((both volumes) fourth edition) These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.
1 year Green Building magazine subscription Green Building magazine is the UK's only eco-building magazine. It always features a wide range of eco-building projects from all around the UK.
Ecohouse 3 Sue Roaf never fails to impress with her inexaustible energy, forthright opinion and attention to detail. Ecohouse has become a classic in the green building genre.
Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.
General: How Can I Insulate Hot Water Pipe Under Hallway Tiles
I have a hallway with period tiles and the hotwater pipe runs under them to the radiators. I have dug the pipe out by breaking through some sort of concrete stuff and found that it is surrounded by gravel with no lagging. Is this worth lagging? It only is under ground for around 2 meters.
If so just thinking how to lag the pipe whilst providing a solid foundation for the tiles that will be put on top.
Perhaps using foam insulation around pipe and then pouring limecrete over them would be the answer. Any advice would be great. Cheers.
Def. worth lagging, or else you are going to waste an awful lot of heat.
Try digging out around and under the pipes, then clad in closed cell foam, Armaflex-type, the thicker the better. Then cover with a clay pipe, cracked in half along its length, or similar rigid structure. Try to keep the xxxcrete away from the pipes, are they copper?
Its not as bad as you might think -- you could do perimeter or wing insulation instead always assuming the whole lot is ground bearing heat will be stored in the ground then.