Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.
1 to 30 of 30
Posted By: beelbeebubI had a lot of problems with fitting the compression fittings to the threaded ports on the tank.For some reason they have sunk the ports really far into the insulation and it's almost impossible to get a spanner on them.
Posted By: billtNo kit needed, just buy them. BES sell them, among others.
Posted By: billtAs the tank's steel I don't see that it's a problem!
Posted By: billtThe tank is steel AFAIK and the direct inputs are threaded bosses in the tank walls. The coils have brass threads but they aren't recessed, so are easy to get at.
Posted By: billtWhat's the concern? Presumably it's galvanic corrosion, but most normal central heating systems have multiple iron/copper connections at the radiators and at the boiler. Why does a steel tank make things worse?
Posted By: pmusgroveFor some reason there is a cold water outlet as well as cold water inlet
Posted By: HairlocksOn a relate note. My solar Plus 750 tank say 1.5 Bar on it and looks like the maxium the solar coils and DHW should be limited at this. Is this correct as my mains water pressure is almost 5 bar. Do I need to install a presurre regulator?
© Green Building Press