| Green Building Bible, Fourth Edition |
|
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment. PLEASE NOTE: A download link for Volume 1 will be sent to you by email and Volume 2 will be sent to you by post as a book. |
Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.
1 to 27 of 27
Posted By: OspreyJeff
I am pretty sure bonded eps beads injected into the cavity would pretty much eliminate air movement there, or am I missing something?
Posted By: OspreyI appreciate 100mm ewi would be better than 50 (and 150mm better still) but there are some practicalities that may not allow it.Can you outline those practicalities? might make a difference. On a project with 200EPS EWI on cavity walls with unknown-quality previous cavity fill, it's made a huge difference, as you'd hope with 200 EWI. No attempt to seal top of cavity wall.
Posted By: OspreyMy cavities are vented to the underfloor air bricks and and also have a couplemof their own airbricks.
Posted By: OspreyMy house cavity tops are accessible from the loft. If fact they provide the sole loft ventilation, which will have to be addressed when I do the walls..
Posted By: OspreyMy cavities are vented to the underfloor air bricksbut I guess you're looking at insulating, even full-filling your u/floor, as per much discussion on here? Then those air bricks can be sealed.
Posted By: Ospreyand and also have a couple of their own airbricksBung them up too - the EWI will do that anyway.
Posted By: OspreyI guess EWI could be fitted around drain/sewage pipes without losing TOO much insulation (as wall cavities would be filled) but may look a bit oddShould be possible - tragic to half-measure your EWI investment just for a want of a bit of creative design!
Posted By: OspreyStill needed for underfloor, imoAFAIK, the consensus here was no, an old myth, not needed, provided any water entering from outside has been fixed.
Posted By: tonyWould it pass building regs?
1 to 27 of 27